Search results

  1. G

    hello m8 do u still have the gearbox and whats the millage on it, has it come out a gt or glanza...

    hello m8 do u still have the gearbox and whats the millage on it, has it come out a gt or glanza and is it the lsd model?
  2. G

    hello m8 seen your gearbox and lightweight fly wheel is provisionaly sold but it u still have it...

    hello m8 seen your gearbox and lightweight fly wheel is provisionaly sold but it u still have it ill pick it up this weekend as long as its in good knick. My second gear sincro is on its way out and gearbox needs rebuild but ill have urs off you instead. how many miles has it done and when was...
  3. G

    changed front wheel bearing now abs light is on? any help would b apreciated

    ahhh thats what i susspected, i havent aligned the rear sheild/seal with the abs sensor so it must be blocking the signal from the sensor. Thanks for the help guys ill sort it out at weekend, thank fuck i dnt need to press the bearing out again!
  4. G

    changed front wheel bearing now abs light is on? any help would b apreciated

    got a wheel bearing kit through work for a toyota starlet 1.3, are the bearings different for glanzas. as i know some bearings are magnetic for the abs sensor to pick up off of. fitted the bearing fine but now the abs light is on?
  5. G

    good chassis mod opinions + professional suspension set up in or around essex area?

    Hello fellas Currently got bc coilovers, and adjustable panhard rod on my 1999 glanza but as u all know the handling on the glanza isnt all that so was going to do a couple more worth while chassis mods: wishbone front poly bushes wishbone rear poly bushes or anti lift/caster kit ( if its...
  6. G

    drivers side electric folding mirror

    need a drivers side electrically folding wing mirror, any colour will do as long as the mirror adjust and folding mecanism is in good working order. pm, call or text me on 07745306730 regardz Grazza
  7. G

    Engine rebuild parts needed

    Hi guys need some engine re build parts for my 1999 Toyota Glanza V as I made school boy error of replacing the water and vacum lines on my throttle body the wrong way round and seize my pistons up, minimal damage just 2 bent conrods. Parts needed: - 4 conrods (preferably starlet gt as they...
  8. G

    glanza frontmount intercooler pipe with dump valve outlet

    Hi i need the frontmount intercooler pipe that comes off the inlet mannifold with the dumpvalve outlet welded on to it like on the HDI frontmont kits. If anyone has one or knows wher i can get it form let me know.
  9. G

    Car wont start any help would be apreciated

    thanks for the reply i changed the plugs to 3 different types of spark plug changed the spark leads twice took my distributer cap off and checked the points and rotor arm they all still looked in working order and i cant remember the fuel pressure but when i got it rollin roaded and tuned the...
  10. G

    Car wont start any help would be apreciated

    My cars being a pain at the minute at first the engine idle kept on dropping out and fluctuating so reasearched and checked and changed spark plugs, spark leads, new battery, new/better battery earthing, idle control valve this was ok for a while. then started dropping out again and cutting...
  11. G

    wanted Tongs ct9 hybrid turbo

    u know what i mean no structuraly weakening cracks odviously the turbo may have some small or hair line cracks caused by heat and expansion and im willing to accept them lol. like i said if its abit iffy ill get it overhauled at a turbo company
  12. G

    wanted Tongs ct9 hybrid turbo

    Hello fellas Im after a tongs hybrid ct9b turbo, the younger the unit the better, no cracks, none or minimal shaft play and no smoke pritty much no duds or ruined turbos, although i mite take a half desent one if its at the rite price and just get it re conned n re balanced. Thanks Graham
  13. G

    whats the best way to wire in Greedy BCC either into the ecu loom or Map sensor?

    hello fellas Currently have a HKS fcd wired in to my ecu loom but it keeps dipping my volts all over the place and lowering my engine idle revs to keep the car under fuel cut, so ive bought a Greedy BCC as it does the same job but holds the volts more steady but would like to know which way...
  14. G

    where to get a desent ct9 hybrid?

    ive had a couple of offers and emailed CRturbos and racetec but im keeping all my options open then gona take the plunge when ive made my mind up thanks for the help fellas
  15. G

    where to get a desent ct9 hybrid?

    yea if i could have enzos number that would be awsome. Only if hes ok with it some people get abit wierd with people giving their number out.
  16. G

    where to get a desent ct9 hybrid?

    Thanks for the feed back guys i should have the money for it by the first of next month. how much are the tongs turbos?, I've deleted my Facebook was doin my nut lol. Is their any other way of contacting this enzo then Facebook or the uksc site?
  17. G

    where to get a desent ct9 hybrid?

    Hello fellas looking for a Hybrid ct9 turbo as i want more power but dont want to go down the rout of having to get a whole new mannifold, down pipe, oil lines etc etc for a tdo4 conversion. So was looking at a tongs hybrid turbo but cant seem to find anyone selling them on the net, got...
  18. G

    JAM fuel cut controler/fuel cut defencer wanted

    currently have a hks fuel cut defencer and want a swap to a JAM fuel cut controler as they work slitly different. The HKS fuel cut defencer seems to dip and peak the volts all over the place. Money waiting or welcome to swap for my HKS fuel cut defencer, tell me a price ur willing to sell for...
  19. G

    fuel cut defencer wireing questions can you use ur front speaker + and - for the fcd?

    thanks m8 is their any other + and - i could wire it in to? i dnt wana fuck around with my ecu's + and -
  20. G

    fuel cut defencer wireing questions can you use ur front speaker + and - for the fcd?

    hay guys just wondering if you could use the front speaker live and negaive for the live and negative power source for the fuel cut defencer or is it not a ignition live and negative? coz had my last fuel cut defencer scotch locked in to the ecu live and negative and it wasnt a good connection...
Top