Search results

got a wheel bearing kit through work for a toyota starlet 1.3, are the bearings different for glanzas. as i know some bearings are magnetic for the abs sensor to pick up off of. fitted the bearing fine but now the abs light is on?

Hello fellas Currently got bc coilovers, and adjustable panhard rod on my 1999 glanza but as u all know the handling on the glanza isnt all that so was going to do a couple more worth while chassis mods: wishbone front poly bushes wishbone rear poly bushes or anti lift/caster kit ( if its...

need a drivers side electrically folding wing mirror, any colour will do as long as the mirror adjust and folding mecanism is in good working order. pm, call or text me on 07745306730 regardz Grazza

Hi guys need some engine re build parts for my 1999 Toyota Glanza V as I made school boy error of replacing the water and vacum lines on my throttle body the wrong way round and seize my pistons up, minimal damage just 2 bent conrods. Parts needed: - 4 conrods (preferably starlet gt as they...

Hi i need the frontmount intercooler pipe that comes off the inlet mannifold with the dumpvalve outlet welded on to it like on the HDI frontmont kits. If anyone has one or knows wher i can get it form let me know.

My cars being a pain at the minute at first the engine idle kept on dropping out and fluctuating so reasearched and checked and changed spark plugs, spark leads, new battery, new/better battery earthing, idle control valve this was ok for a while. then started dropping out again and cutting...

Hello fellas Im after a tongs hybrid ct9b turbo, the younger the unit the better, no cracks, none or minimal shaft play and no smoke pritty much no duds or ruined turbos, although i mite take a half desent one if its at the rite price and just get it re conned n re balanced. Thanks Graham

hello fellas Currently have a HKS fcd wired in to my ecu loom but it keeps dipping my volts all over the place and lowering my engine idle revs to keep the car under fuel cut, so ive bought a Greedy BCC as it does the same job but holds the volts more steady but would like to know which way...

Hello fellas looking for a Hybrid ct9 turbo as i want more power but dont want to go down the rout of having to get a whole new mannifold, down pipe, oil lines etc etc for a tdo4 conversion. So was looking at a tongs hybrid turbo but cant seem to find anyone selling them on the net, got...

currently have a hks fuel cut defencer and want a swap to a JAM fuel cut controler as they work slitly different. The HKS fuel cut defencer seems to dip and peak the volts all over the place. Money waiting or welcome to swap for my HKS fuel cut defencer, tell me a price ur willing to sell for...

hay guys just wondering if you could use the front speaker live and negaive for the live and negative power source for the fuel cut defencer or is it not a ignition live and negative? coz had my last fuel cut defencer scotch locked in to the ecu live and negative and it wasnt a good connection...

hi looking for a see through revers scoop look prity cool n getting my bonnet 3m carbon fibre wraped and wouldnt mind a see through revers scoop to set it all off if none about will settle for a normal fibre glass or frp reverse scoop whant pics before i part with any money thanks

hay guys cars not starting its turning over sparking thats all fine its the fueling thats being a bitch! it was being a pain to start at first took a couple of trys than fired up for te past couple of weeks than when i was driving it it cut out! when i turn it over theirs no fuel presure i...

hi guys need a HDI or simular intercooler hot pipe as i have a jperformance fmic were the hot pipe track goes over the mannifold and im after a shorter route for better turbo spool up thanks :rockon:

hi have a jperformance intercooler (blitz replica) with the intercooler hot pipe going over the mannifold need a shorter route hot pipe Thanks :rockon:

my front mount intercooler is a jperformance one based on the blitz intercooler with the hot pipe going over the mannifold i would like a shorter hot pipe maby a HDI one if theirs any about or any other varients interested in rotated ct9 intercooler hotpipes to as was going to rotate my ct9...

Hi fellas first tread ive made, looking to rotate my ct9 turbo to shorten the fmic piping but when rotating it it moves the possition of the actuator mounting holes so need a custom bracket to mount a hks adjutable actuator in the normal place but on a rotated ct9 turbo if u get my drift...