1996 Glanza V Breaking

Jay

Admin
After seeing more than a few I'd be removing as much bad metal as I could and replacing the whole panel.

You'd be wanting to do it once and doing it right rather than just patching bad metal every year lol.
 
After seeing more than a few I'd be removing as much bad metal as I could and replacing the whole panel.

You'd be wanting to do it once and doing it right rather than just patching bad metal every year lol.
Fun Fact, most starlets on the planet have rust to some degree, Very Few locations are suitable, australia being the perfect location to keep a starlet alive
 
  • Like
Reactions: Jay

SKINY

Lifer
What do most lads do replace the full sill are just patch up the rust spots?
I was lucky enough to grab a full side cut from Jay in very good condition for mine and I have a new sill from a small Ford for the passenger side, unless I can track that other side cut down :)
 

Jay

Admin
Getting down to the bare bones now, the shell heads to heaven this week unless someone brave steps up.

I have:

All side glass (local collection only)
Power steering rack and pipes
Wings (local collection only)
Doors (local collection only)
Arch liners and undertrays
Wiring looms & ECU
Dashboard
Plenty of interior plastics
HKS FCD
Wiper linkage and cowl panel
Front bumper bar
Headcloth
Tail lights
Steering column
Key and lock set excluding tailgate barrel
Carpet
ABS pump

All below current market values for quick sale. Poor car had a hard life so conditions (and prices) will reflect this.
 

SKINY

Lifer
If you could modify the bumper bar or cut and weld the centre section into the GT il take it bud :)
 

Jay

Admin
No joy on the rear panel Duncan, seems I didn't cut this last one low enough.

Glanza shell has sold so I have to put the grinder away lol.
 

Attachments

  • 20211109_111600.jpg
    20211109_111600.jpg
    414.6 KB · Views: 8

dac69er

Super Moderator
No joy on the rear panel Duncan, seems I didn't cut this last one low enough.

Glanza shell has sold so I have to put the grinder away lol.
Thanks for looking, that's a bugger about the rear panel, but never mind.

Any luck with a non abs GT washer/coolant bottle?
 

Jay

Admin
Thanks for looking, that's a bugger about the rear panel, but never mind.

Any luck with a non abs GT washer/coolant bottle?
This one is about the cleanest I got but it'll need a bit of elbow grease to bring it up to standard.

20211030_090922.jpg
 

dac69er

Super Moderator
Hi Jay, apologies I took so long getting back. I needed to check my abs GT to confirm it all looks like it should fit. its in storage so took a while to get a chance to check it.

Anyway, I'm happy it is all good so if you can send me the price for the bmc and servo as well as the washer/coolant bottles I can sort you out payment.

I am also interested in the GT rear garnish lense you posted up on another thread for refurbishment purposes if that is still available?

Thanks
 
Last edited:
Top