3.5 bar fuel pressure

[RGM1800]

hi there. can stock injectors handle 3.5 bar of fuel pressure? but on the other hand will be using safc2 to trim the excess fuel.

i really appreciate your replies thanks

 

[sanchez]

I know they handle just over 3 bar as i have driven my car to mot like it

 

[JasonGlanza]

why are you using that much pressure?

 

[RGM1800]

why are you using that much pressure?

im planning to run 1 bar on a ct12 w/o fcd. overfuel then trim it down to reduce stock injectors duty cycle

 

[JasonGlanza]

seems too much pressure, better to install a wideband mate and check it out to be sure and safer

 

[HYBRID]

Injectors are usually calibrated at 3bar. Racing injectors can take up to 60psi of base pressure (that is if they are single pin type). The squirt type injectors (like the oem 295cc's) which have 4 holes do not like base pressures of over 3.5bar as the injector coil is not as strong as the single pin type and can fail more easily.

Kon