4E-FTE error code 24

Badmoon

Badmoon

Member +
Hi guys!
Today I went to check for any stored errors in my ECU and the error code 24 was registered.
Does anyone know what I should check to fix this?
I didn't notice any change in the engine while running nor has the engine light came on while doing so.
Thanks in advance!
 
Badmoon

Badmoon

Member +
Another thing... My ECU is a Blitz Access for the EP82, don't know if this information is needed.
 
dac69er

dac69er

Super Moderator
Intake air temp sensor I believe that is.

It's screwed into the front of the intake manifold.

Check the connection and the sensor itself to begin with.
The wires near the plug can split and corrode over time
 
Badmoon

Badmoon

Member +
dac69er said:
Intake air temp sensor I believe that is.

It's screwed into the front of the intake manifold.

Check the connection and the sensor itself to begin with.
The wires near the plug can split and corrode over time
Click to expand...
Thanks for the reply!
Have just checked the connection and seems to be okay, used some eletrical contact spray to clean it too. Tomorrow I'll give it a go.
Should I disconnect the ECU to reset before riding the car?
 
Badmoon

Badmoon

Member +
Hey guys need some help here...
I went to check for errors doing the normal paper clip bridge and the CEL keeps on flashing non stop!
It's the first time this happenned.
Can someone tell me what this means?
Thanks!
 
Badmoon

Badmoon

Member +
SKINY said:
That means no faults stored Bud :)
Click to expand...
Good to know!
Think I always had some error code stored when doing this procedure so never got to see what no errors stored looks like!
So for the error 24 all I did was cleaning the connector with the spray, reset the ECU and didn't come up again. I'll update the thread if it happens again.
Thanks for all the help, I really appreciate the effort from the forum members always willing to share some of your knowledge trying to solve other members problems!
 
You must log in or register to reply here.
Top