4EFTE hose diagram needed

YeepSera

Fresh Recruit
Hello, I have a Sera that was swapped with a 4EFTE Starlet motor. I’m trying to put everything together after replacing head gasket and fouls a couple of hoses that I can’t identify. The first is a vacuum hose coming from the underside of the intake manifold and the second is a small tube coming out of the tube running from the water pump. (Pictures attached). Would anyone have the pages from the manual that shows the hoses?
66835715-CB2A-4223-A4EE-6E404FDEEA5F.jpeg
6F990338-FB27-4A00-8F9E-8102A28393B6.jpeg
 

Jay

Admin
The line from the vacuum block heads to the power steering rack.

20201208_101522.jpg

20201208_101549.jpg

The line from the coolant hard pipe heads to the throttle valve.

20201208_101424.jpg

20201208_101506.jpg
 

YeepSera

Fresh Recruit
Thanks, that is helpful! as far as the power steering vacuum lines... does it matter which port each hose connects to on the power steering end?
 

SKINY

Lifer
Nice one :D you should start a build thread and show us all what your up too :cool: Seras are a class looking wee car
 
Top