5E/4E Same Water & Oil Pump

[nyahbingi]

Does the 5E use the same water pump and oil pump as the 4E?

 

[Dave@TM-developments.com]

Yes

 

[fur]

same water pump
a few different oil pumps.......some have the pickup for crank fire ignition...some do not

 

[Dave@TM-developments.com]

Which 5e engines have a crack sensor? Sounds interesting

 

[fur]

the 5e in my car currently......came without a distributor and used coil packs much like some of 4efe's from 1999 jdm reflects
i initially purchased a "normal" 5e oil pump for it but it didn't fit so i had to carry the old one and have it matched........local toyota informed me of there being 3 or so different types

 

[Dave@TM-developments.com]

So that was standard?

 

[fur]

yup
stock standard boss

TOYOTA 1.5 1496 4 - 5EFE 9/94-UP Tercel, Paseo, 5EFE, DOHC, 16 VALVE, Crank position sensor on oil pump housing, cam sensor in end of head 838A $1,690 $400 $195*

take a look here.....
http://remanufactured.com/Toyota_ Engines.htm

 

[sx_turbo]

toyota done 3 types of pump in the american market,

1 was a special "california spec"

the other 2 were just on year change and early and a late one.

 

[Dave@TM-developments.com]

Interesting stuff

 

[fur]

correct
especially for the guys running coil packs with standalone ecu's that wanna remove the dizzy altogether
if u know the crank angle, u know the cam angle and vice versa

 

[Dave@TM-developments.com]

 

[gorganl2000]

well i can say there are 2 types of water pump for 4e/5e

now before, i knew of 2 types of oil pump for 4e/5e.....with fur's info, that takes the tally to 3

however, question fur,,,,,do u know if ""your" oil pump comes in 2 variations also?...which would then make it 4 oil pumps???

 

[AzE_B]

the 1st gen 5e pump has no seal were the 4e dose
and the 2nd gen 5e pump is the one with the crank sensor in it

 

[fur]

the 1st gen 5e pump has no seal were the 4e dose
and the 2nd gen 5e pump is the one with the crank sensor in it

spot on

 

[ogradyh]

Thread revival here,

But can anyone answer whether there is such a thing as a OEM

Oil pump + crank sensor with a seal on the pump.

I'm building a 5E-FHE + t and looking to incorporate a crank sensor.

If there isn't, would running no O ring be an issue if both the block and pump didnt have a chanel for one?

 

[mado]

Does the 5E use the same water pump and oil pump as the 4E?

2efe block with a injector head what timing belt to use