Video guide to setup a TD04 system
This gets asked so often (including my self 2 months ago!!) so i have made a video diary of me setting mine up. Note this is based on my setup below and i understand that you can do it via an uprated ECU etc, but its the cheapest way to get TD04 power
this is based on an engine with standard internals.
Part 1. Starting off with what parts you need to do the conversion
[video=youtube;aRpbx-o-acg]http://www.youtube.com/watch?v=aRpbx-o-acg[/video]
Part 2. A guide on all the parts fitted to the car and what they do
[video=youtube;PqqnwF0KK_0]http://www.youtube.com/watch?v=PqqnwF0KK_0[/video]
Part 3. An explanation on any extra custom work needed, in this case, rotating the turbo to fit correctly and also a HKS custom bracket for the TD04.
[video=youtube;-uUuPNbt-x8]http://www.youtube.com/watch?v=-uUuPNbt-x8[/video]
Its based on my setup currently using a
Greedy FCD
Sard RRFPR
Toyosports TD04
Toyosports Decat
TD04 Turbo
Walrbro puel pump
HKS actuator
FMIC
Braided oil lines
Alloy Radiator
Few other bits and pieces
The only cock up i can see in the vid is when i was talking about installing the FCD and accidently mentioned an uprated ECU (ignore that) as you wouldnt need the FCD with a piggyback ecu.
I think i have covered everything, its worth to note you will need to rotate your turbo to fit like mine (they dont come facing that direction) search on here for info, there is plenty to do it.
Hope this helps people as a video guide is always better than pictures!
This gets asked so often (including my self 2 months ago!!) so i have made a video diary of me setting mine up. Note this is based on my setup below and i understand that you can do it via an uprated ECU etc, but its the cheapest way to get TD04 power
this is based on an engine with standard internals.Part 1. Starting off with what parts you need to do the conversion
[video=youtube;aRpbx-o-acg]http://www.youtube.com/watch?v=aRpbx-o-acg[/video]
Part 2. A guide on all the parts fitted to the car and what they do
[video=youtube;PqqnwF0KK_0]http://www.youtube.com/watch?v=PqqnwF0KK_0[/video]
Part 3. An explanation on any extra custom work needed, in this case, rotating the turbo to fit correctly and also a HKS custom bracket for the TD04.
[video=youtube;-uUuPNbt-x8]http://www.youtube.com/watch?v=-uUuPNbt-x8[/video]
Its based on my setup currently using a
Greedy FCD
Sard RRFPR
Toyosports TD04
Toyosports Decat
TD04 Turbo
Walrbro puel pump
HKS actuator
FMIC
Braided oil lines
Alloy Radiator
Few other bits and pieces
The only cock up i can see in the vid is when i was talking about installing the FCD and accidently mentioned an uprated ECU (ignore that
) as you wouldnt need the FCD with a piggyback ecu.I think i have covered everything, its worth to note you will need to rotate your turbo to fit like mine (they dont come facing that direction) search on here for info, there is plenty to do it.
Hope this helps people as a video guide is always better than pictures!