ACIS manifold video???

spuddy

spuddy

Ulster Area Rep.
Its good to see a nice graph showing it all working.

Get your turbo repaired and try it again, could see more improvements.

Peak power is quite deceptive, you see it with Honda N/A tunning, they fit an ecu and get 3hp or something mad, but when you look into the graph they have made 30-40hp in places they never had it before and thats the power your after.
 
billybob

billybob

Untrusted Seller
spuddy said:
Its good to see a nice graph showing it all working.

Get your turbo repaired and try it again, could see more improvements.

Peak power is quite deceptive, you see it with Honda N/A tunning, they fit an ecu and get 3hp or something mad, but when you look into the graph they have made 30-40hp in places they never had it before and thats the power your after.
Click to expand...

You in need of an acuis spuddy lol me and john can cut you a deal with one
 
G

gorganl2000

Lifer
very good info provided weejohn
really a nice improvement



makes me wonder about the jump from 5200 to 3800rpm,,,must be a significant improvement
 
Last edited:
G

gorganl2000

Lifer
not sure of the program
but the acis can be triggered by a standalone and some piggyback systems
you can even get an rpm switch to trigger it
 
billybob

billybob

Untrusted Seller
rpm switch does the job from what ive heared but wee johns the man to ask as he has it working like clockwork
 
weeJohn

weeJohn

Lifer
Also set one up using a pressure switch measuring boost at the manifold. Max boost was 1 bar, set the switch for 0.8 and it worked ok.

No dyno test for this set up but so no idea if its better, worse or the same. Seemed to be full boost was a good spot to change the runners so decided to try it with a willing guinea pigs motor lol.
 
billybob

billybob

Untrusted Seller
weeJohn said:
Also set one up using a pressure switch measuring boost at the manifold. Max boost was 1 bar, set the switch for 0.8 and it worked ok.

No dyno test for this set up but so no idea if its better, worse or the same. Seemed to be full boost was a good spot to change the runners so decided to try it with a willing guinea pigs motor lol.
Click to expand...

lol
 
ramses974

ramses974

Member +
hekker said:
is there any of them airco valves near the trotle body that can be used as a switch for boost
Click to expand...

i do not understand ...the Acis must be activated at a certain boost vs rpm level ...for example at 0.4b you cannot otice nothing when activated ..but over 1b ou will feel it better
 
You must log in or register to reply here.
Top