Bee*R Rev Limiter Instructions Inside..

[Fishy89GT]

ill do that now!

feckin japanese instructions lol!

least i didnt drive much since i fitted it anyway lol

cheers for all the help fishy and the fast replies

no probs man...youll test it now...and deafen all your neighbours lol...there gonna love you, how my neighbours love me

 

[Aidan@EP-styling]

im not too bad as i live in the country...!

does your car ever have a voilent miss? (feels like fuel cut) but its the bee r as it flashes then the engine management light comes on but if you adjust the gain back a little bit then its perfect again??

^^^ this is when driving normal with handbrake off and in low revs

 

[liamgtturbo]

bee rev limiter

anyone no where to get these

 

[ragz]

rhdjapan.com

use the coupon code: EPFEVER

 

[tom_hunt]

im not too bad as i live in the country...!

does your car ever have a voilent miss? (feels like fuel cut) but its the bee r as it flashes then the engine management light comes on but if you adjust the gain back a little bit then its perfect again??

^^^ this is when driving normal with handbrake off and in low revs

I get that with mine. Duno what it is. Im takeing it out though. Dont trust it.

Tom

 

[Fishy89GT]

im not too bad as i live in the country...!

does your car ever have a voilent miss? (feels like fuel cut) but its the bee r as it flashes then the engine management light comes on but if you adjust the gain back a little bit then its perfect again??

^^^ this is when driving normal with handbrake off and in low revs

when it cuts in on the rpm you have set it at...yes..you do..its quite violent..if you think it is turn the gain/yellow one down to soften it..

The managment light comes on...because in essence is a misfire..

 

[Camy]

god...on my paseo i've just do a stupid ting... i've put the green wire on the wire #6 instead off the 7...

So when i put the GAIN button at zero the car run good and have the good cut-off at 7200 rpm (stock) and when i put the gain button at 1 to F the car is not reving and it stall after serious engine bug down.

Well it's a good thing that i've notice this!

ANd i have a question... for the E-Brake switch... i just weld the white wire on the only one wire from the switch right?

 

[Fishy89GT]

lol no welding please lol soldering is more appropriate.

but yep there is just one wire from the handbrake, just make up a splice though its alot easier

Si

 

[Chris@CCM]

anyone no where to get these

if u want one dude ill sell and fit the one off my car if u want for u

 

[Aidan@EP-styling]

if u want one dude ill sell and fit the one off my car if u want for u

just out of curiosity chris why are you selling it?

so far it hasnt done any harm to my car yet!

 

[Chris@CCM]

i was only going to be using it for luanching mate buts it far too good and spins the wheels on luanch so i dont need it. it dont use it as a limtter as its far to harsh and not realy needed .it brings on my eml too some times even when its not kicked in

 

[Killamats]

does the light on the bee-r light up when you turn on the car?
i am trying to connect one up I got from mully a few weeks back and its not working..

 

[Fishy89GT]

no mate...only when you hit the limiter its set at...did you use my diagram...also make sure the gain isnt on 0, as its all off then

Rep points ftw

 

[Killamats]

ahh rite ok mate thanks, i'll make sure its connected as on the diagram tomorrow and try it again.

rep added

 

[Fishy89GT]

lol cheers... anymore problems just ask mate Be care with it though!

 

[hkspower]

hi fihy . this mornig i try it rev 1 and 2 at 0 and it workd . but it's normal that the engine check comes on and it go's a bit after ?

thanks
chris

 

[Fishy89GT]

thats because when you hit the bee*r limiter its a massive missfire..hence why it throws the engine check light one....and its off when the gain (yellow knob) is on 0

 

[ryan-11]

anyone know what wires do what on the bee r, i know/think the red wire is positive, black is earth and white is handbrake but what r the yellow and green wires?? im trying to fit one to a micra

 

[Craig]

anyone know what wires do what on the bee r, i know/think the red wire is positive, black is earth and white is handbrake but what r the yellow and green wires?? im trying to fit one to a micra

Oh dear!

Yellow = Ignition Feedback from Ignitor-Coil.
Green = Integrate Ignition Assembly (RPM)
Red = Distributor Crank Angle
Black = Ground/Earth

Hope that helps! (Rep if it does )

 

[ryan-11]

nice one Craig cheers