Crankshaft sprocket fitting

[Johnoglanza]

Hi ive fitted the oil pump and im havin difficulty in fitting the crankshaft sprocket back on and i wonderin do ye have any advice on how to do it without damaging it thanks

 

[davehart]

Not done this job myself.

Mayby try heating the sproket up and using a good amount of lubrication. Use a socket the size of it to lightly tap it back on.

 

[dac69er]

if everything is clean and undamaged, it should go on with a light tap.

check the key is in fully on the crankshaft, check for any burrs. use a bit of lube and have another go.

 

[Skalabala]

if everything is clean and undamaged, it should go on with a light tap.

check the key is in fully on the crankshaft, check for any burrs. use a bit of lube and have another go.

Cant add anymore on that.