ct9 water feed hose

[Ryan_EP88 GT]

does anyone know the dimension of the water in/out pipe or for the hoses that connects them to the block?

thanks,ryan

 

[MARK@CMBAUTOS]

Im sure it's 10mm but don't hold to that

 

[rwdrev]

marks right, 10mm, cos i did ordered a 180 degree pipe, but now cant use due to wastegate pipe in the way

 

[Ryan_EP88 GT]

thanks guys!

marks right, 10mm, cos i did ordered a 180 degree pipe, but now cant use due to wastegate pipe in the way

u running ext wastegate?

 

[Ryan_EP88 GT]

ive one other question also guys, i had to remove the feed from the vac pipe to boost gauge becos the car was not connected to the vsv properly through the tee. at the min i only have the dumpvalve in the 2nd port of the tee, with the vac pipe connected to port1 & 3 of the tee, (if u still follow sory bout the explainin lol)..what shud i do to reinstall the boost gauge? to add another feed?

 

[rwdrev]

yh, am runnin ewg, but the 180 loop is too long and would sit on the ewg and melt!! lol cant cut it down enough or the pipe would kink