E-Manage
- Thread starter shauntgtt
- Start date
Nick@TD.co.uk
Registered Trader <a href="http://www.TuningD
Which harness's are on it? e.g. is there 1 plug in the back of it or 2? and does it have a little thin wire plugged in it as well, the thin wire would be the pressure sensor.
TurboDave
Member +
You will need to find out if you have any harnass's connected to the E-Manage, if you have the injector, ignition harnass then all you need to do is take it somewhere to get mapped. Have a look at the unit and see how many plugs are going into it.
Failing that you would need to get the necessary harnass's and then get it mapped.
Failing that you would need to get the necessary harnass's and then get it mapped.
TurboDave
Member +
This may help you mate, Here is a picture of my E-Manage complete with, power supply, ignition harnass, injector harnass and the boost pressure sensor harnass. The small plug on the left is the boost pressure sensor, not sure on the others. The picture also shows my boost pressure sensor which is on my bulkhead next to the standard sensor.
Nick@TD.co.uk
Registered Trader <a href="http://www.TuningD
Hey DaveThis may help you mate, Here is a picture of my E-Manage complete with, power supply, ignition harnass, injector harnass and the boost pressure sensor harnass. The small plug on the left is the boost pressure sensor, not sure on the others. The picture also shows my boost pressure sensor which is on my bulkhead next to the standard sensor.
Is it right you gotta have the pressure sensor pointing down? mines sat sideways atm
Nick@TD.co.uk
Registered Trader <a href="http://www.TuningD
O right ive got mine sideways, works well tho so ill leave like that for nowYeah it is supposed to be pointing down so moisture doesnt get in it I am led to believe