Emanage Questions

[Djaniero]

the additional afr harness is only necessary if you want to datalog your afr through your emanage ultimate while tuning/driving.
emu has datalogging capabilities---boost, engine speed, injector duty cycle, intake temp, coolant temp, etc.---you can select at your discretion

Thanks...will respond to your pm also

 

[SKINY]

Like myself..........

 

[Fizturbo]

Av also been using emb with Td04 since 2009 never had any issues.
Lookin forward to getting the emu with plug and play harness mapped.

 

[Djaniero]

Av also been using emb with Td04 since 2009 never had any issues.
Lookin forward to getting the emu with plug and play harness mapped.

Did you hard wire yours in Fiz or did you use a plug and play harness?

 

[SKINY]

The pnp harness would be good but think they are dear enough for what they are
A mate made his own for his gt-four using an old ECU and plugs with tails for a link years ago, still going strong

 

[Fizturbo]

@Djaniero Emb was hard wired.
May be hardwire another emb may be your old 1 lolz in 2nd starbo or find a pnp loom.

Got pnp loom with emu.

 

[RoyalDutchie]

You can always fabricate your own pnp loom. All plugs for the ep82 ecu are readily available at rs-online. The male plug is just crimping the wires correctly with the pins. female socket needs a bit of soldering. with wires etc it may cost about 20 gbp and a few hours of your time.

 

[Djaniero]

You can always fabricate your own pnp loom. All plugs for the ep82 ecu are readily available at rs-online. The male plug is just crimping the wires correctly with the pins. female socket needs a bit of soldering. with wires etc it may cost about 20 gbp and a few hours of your time.

Thats good to know. Luckily I managed to get one with a pnp harness. I was going to buy an afr harness, but found this online.....how to diy harness instead?

https://www.my.is/threads/diy-emana...rBVQKoW9bDcqIFEiw5ifTyJ44cTLAsrD40wEfRF4IRa0s