Engine help

[GTnomez]

Engine is in now and i only have a few things to connect up before i start it.

The coolant pipes on the throttle body, now i know which are coolant and which are vacuum BUT do the coolant ones go a certain way i.e one is for in and on is out?

By the gearbox there should be two loose plugs if i havent got the turbo kit connected right? One is for the lambda sensor and the other is the cat temp sensor?

There is a couple of others but i will update with a pic to help.

Cheers

 

[whiteglanzav]

This pik should help a bit and i dont think it matters which way they go round as the water can only flow in 1 direction

http://www.toyotagtturbo.com/forums/showthread.php?67023-Throttle-Body-Pipes-*&highlight=PIPES

 

[GTnomez]

^ I know which are coolant and which are vacuum Ed but cheers about the first part though! Thanks! Thats what i wanted to hear so thats that part sorted

 

[whiteglanzav]

no problem sunshine

the plugs you describe sound as if they are the oxygen and lambda

and the other plug you have piks of on uksc look as if it could be the knock sensor half way down the back of the block in the middle as its only a single pin

 

[GTnomez]

Cheers for that mate!

I guess they were lambda and cat temp so that another sorted.

And im having problems with the knock sensor as i already a plug fitted into that sensor. 0_o

 

[whiteglanzav]

starter motor is the only other single pin one around there i think matey

 

[cheshireglanza]

sounds like plug for starter motor