Ep82 Pedals

[Douze]

Hello, the pedals in my starlet are used and the rubber are missing in two of them leaving the bare metal, can those pedals be installed? Do i just drill and setup the pedals directly on the existing pedal?

 

[SKINY]

Seen them before, yea you just work out where you want them and drill through.
Have you tried Toyota for the rubber covers yet ?

 

[Douze]

I'll try to see if anyone has the rubber covers, but most probably will have to order those which will take time

 

[gorganl2000]

Have you tried Toyota for the rubber covers yet ?

Jay, ebay, the breakers or the wanted section---someone is bound to have a decent set laying around somewhere that can be obtained for a cheap price if you really want them

 

[WhiteOverGoldMK1GT]

Seen them before, yea you just work out where you want them and drill through.
Have you tried Toyota for the rubber covers yet ?

going to update on this bit of info, these Rubber parts can be still purchased and came from a rather extensive list of Toyota vehicles, there are,
here is one such example
https://www.ebay.com/itm/151779252833
@Douze

 

[Douze]

I'll try to look locally first cause shipping is a lot to my country, if not I'll choose those sparco pedals

 

[WhiteOverGoldMK1GT]

I'll try to look locally first cause shipping is a lot to my country, if not I'll choose those sparco pedals

I would recommend a set of Okuyama "Dash" metal pedals, mean't specifically for the starlet
usually they come in unpainted aluminium. i have a set, they are great quality

 

[Douze]

I would recommend a set of Okuyama "Dash" metal pedals, mean't specifically for the starlet
usually they come in unpainted aluminium. i have a set, they are great quality
View attachment 7364

Will contact local shops to see if they have these by any chance.