EP82 rpm not working

legend009

Member +
Hy guys. Iv got a 95 ep82 soleil l and converted it to a 4efte. Decided to change the cluster from the old non rpm to one that has the rpm dials. Got everything to work except the rpm, iv tapped a wire from the IGf on the ecu and also tried from thw lls (rpm) from ecu but it doesnt work. If tried on a defi tacho that i have it works perfect. I measured the voltage and its giving me a 0.80 reading( not sure if this is what it should be) What could be the issue? Iv tried practically everything i can think of
 

dac69er

Super Moderator
Have you got all the other pin positions correct on the new dials?

When I swapped mine I had to swap a few of the wires round on the plug connections as well as adding in the additional wire for the rpm.
 

legend009

Member +
Yes all other pins are correct. From fuel signal to temp signal are all working. All the lights are good as well. Read a thread some time back on resostors could it be the case?
 
Top