Gryzor
Admin
There's a P21 bulb in the bottom of the rear tail lights with only 1 connecting wire.
By soldering in an extra wire you can make use of the bulb as a fog light(s).
thread the wire back to the driver foot well..connecting both lights to the same wire..
Just behind the low turbo button there's a plug that's not connected to anything
At the first and last positions on the plug the green wire with a silver stripe has a +12v with the side lights on and the black and white wire is an earth , very handy.
Add in a fuse and a toyota fog switch..
- OFF -
- ON -
The illuminated switch, Toyota part number 00550-35976
£13
Holding the switch with the indicator light at the top, you will see three prongs on the back of the switch.
* Top prong should be connected to the ground wire
* Middle prong should be connected to the "hot" power wire
* Bottom prong should be connected to the wire for the relay
By soldering in an extra wire you can make use of the bulb as a fog light(s).
thread the wire back to the driver foot well..connecting both lights to the same wire..
Just behind the low turbo button there's a plug that's not connected to anything
At the first and last positions on the plug the green wire with a silver stripe has a +12v with the side lights on and the black and white wire is an earth , very handy.
Add in a fuse and a toyota fog switch..
- OFF -
- ON -
The illuminated switch, Toyota part number 00550-35976
£13
Holding the switch with the indicator light at the top, you will see three prongs on the back of the switch.
* Top prong should be connected to the ground wire
* Middle prong should be connected to the "hot" power wire
* Bottom prong should be connected to the wire for the relay
Last edited: