### EP95 turbo conversion ###

[Aidan-G]

No mate,..your loom will not bolt in without some wiring.

so even if i take my whole loom from my gt and put it into the ep85,i still have some wiring to do?

 

[NosydneW]

If you take that route you will save yourself the wiring hassle .

 

[Jay]

so even if i take my whole loom from my gt and put it into the ep85,i still have some wiring to do?

With that path you won't even need a soldering iron mate..

 

[Aidan-G]

With that path you won't even need a soldering iron mate..

thanks lads,thats another question answered!lol

 

[cole]

thanks lads,thats another question answered!lol

this thread has got to be the most helpfull thread in a long time :rockon:

so does anybody no if the glanza bodykit will fit on without any mods (apart from the bonnet and lights having to be changed)

 

[cole]

by the way on screen keyboard ftmfw !:rockon:

 

[NosydneW]

Yes..bodykit will fit cause it's just a EP9x shell. Most holes are also predrilled or even tapped.

 

[Johnny_C]

so even if i take my whole loom from my gt and put it into the ep85,i still have some wiring to do?

id give u a hand if u ever went down that route.

 

[Aidan-G]

id give u a hand if u ever went down that route.

goodman,lol

ill wait till i get my own goin well first,if i blow it up ill just put the engine back in too black bettylolwe'l see how the funds are

 

[steve_322]

Loom in a EP91-95 swap is not a direct change over, small amount of soldering is required. other differences are manual air bag to electronic, heater controls, abs, fuel gauge and pump differences in all these. You must be careful what ep91 you use the loom from.

 

[cole]

Loom in a EP91-95 swap is not a direct change over, small amount of soldering is required. other differences are manual air bag to electronic, heater controls, abs, fuel gauge and pump differences in all these. You must be careful what ep91 you use the loom from.

which loom should i use it out of mate ?

how have you done it

 

[weeJohn]

will you bring me for a spin sometime john!?

No problem Aidan, will be at most of the Bishopcourt drags this year I would say, you can sneak in the passenger seat for a run.

 

[Animal GT]

aido will you please stop takin my ideas.lol

 

[weeJohn]

so even if i take my whole loom from my gt and put it into the ep85,i still have some wiring to do?

You would need to do what Gaz did and put the GT dash and interior into it, and I would say there might be a few other wires inside that need spliced together as well for the fuel pump and rear lights possibly.

I have spliced a GT loom into an EP85 loom 3 times already mate, if you want that done you can give me a shout.

 

[MWP]

You guys are going about this all wrong.
If your going to do this, do it right.

Use the full drivetrain (incl engine) from a ST165/ST185/ST205 (Celica GT4).

 

[NosydneW]

You guys are going about this all wrong.
If your going to do this, do it right.

Use the full drivetrain (incl engine) from a ST165/ST185/ST205 (Celica GT4).

That's everybody's dream mate,...but we have to keep it realistic . Time and money and resources will be the challenge to have the 3sgte setup in there.

 

[cole]

That's everybody's dream mate,...but we have to keep it realistic . Time and money and resources will be the challenge to have the 3sgte setup in there.

yer were not millionaires

yet

 

[cole]

just sent enquiery for a ep95 :rockon:

lets get the project rolling . . . :drive:

 

[TO82]

just sent enquiery for a ep95 :rockon:

lets get the project rolling . . . :drive:

Brown FTMFW :haha:

 

[cole]

Brown FTMFW :haha:

lol nino

toyota jdm dog shit brown i think the colours called

at least its 3 door :rockon:

could soon respray it