### EP95 turbo conversion ###

_GAZ_EP85_

Member +
Make sure u use the 4wd sump as the turbo sump won't fit, it is a smaller sump so you may want to baffle it if you intend in tracking it etc, use the 4wd dipstick and tube if your going 5e
 

cole

Member +
Make sure u use the 4wd sump as the turbo sump won't fit, it is a smaller sump so you may want to baffle it if you intend in tracking it etc, use the 4wd dipstick and tube if your going 5e
staying 4e

how did you make a oil pickup in the 4wd sump ?
 

_GAZ_EP85_

Member +
What I done is use the Gt piece, grind of the tack weld from the back and unscrew it off, the mark on 4wd sump drill hole fit the drain plug and weld it up at the back
 

cole

Member +
What I done is use the Gt piece, grind of the tack weld from the back and unscrew it off, the mark on 4wd sump drill hole fit the drain plug and weld it up at the back
right ok

isit not a difficult job thenn ?

doesent sound too hard ?
 

_GAZ_EP85_

Member +
Yeah mate not a big job but another job to do, make sure you keep the 4wd seat frames as they are slightly different don't do what I done and get rid of them then try and fit the Gt seats to Find they don't fit .
 

cole

Member +
Yeah mate not a big job but another job to do, make sure you keep the 4wd seat frames as they are slightly different don't do what I done and get rid of them then try and fit the Gt seats to Find they don't fit .
ah

whats different mate ?

do the normal seats fit onto the 4wd frames
 

Ted

Member +
gt seats are slightly wider. i have gt seats in mine, couple of different holes need drilled to make them fit. its not too bad.
 

Ted

Member +
have you brought in a jap car before? trevor has a trustable contact over there who hand picks good cars.
 
Top