fitting poly engine mounts

Brendanlez

Member +
looking for a tutorial on fitting my powerflex engine mounts, dont know which site I saw the tutorial but I can not find it all.

All help appreciated, dont want to just whack it in the press and make shite of all.
 

K24-GlanzaV

Fresh Recruit
Fancy sending me that suspension I paid for and never received? Why ignore all my PMS for months and still use the forum... Dick
 

Brendanlez

Member +
This is the last time I'm getting into this, I sent you the suspension, I loweered the price for you and slip the delivery, you were happy enough with it being sent the absolute cheapest possible way. I kept in contact with you while there was a delay in the service, & others where having problems at the time too. You came back weeks later saying that they were never delivered. If I knew where the sheet from the collection was at this stage I would scan it and post it up on the forum.

@Johnny, yeah used the burning gear to remove all the old mounts, just dont want to start squeezing the new ones in in case I make shite of them, not very cheap. Ill give ya a shout later this evening
 

Johnny_C

Lifer
This is the last time I'm getting into this, I sent you the suspension, I loweered the price for you and slip the delivery, you were happy enough with it being sent the absolute cheapest possible way. I kept in contact with you while there was a delay in the service, & others where having problems at the time too. You came back weeks later saying that they were never delivered. If I knew where the sheet from the collection was at this stage I would scan it and post it up on the forum.

@Johnny, yeah used the burning gear to remove all the old mounts, just dont want to start squeezing the new ones in in case I make shite of them, not very cheap. Ill give ya a shout later this evening

did you push the metal shell out?
it also has to be removed,the mounts should then just slot in.
 

mork

Member +
^^x2. You don't ned to press the polyflex bushes in, they should be a perfect fit, provided the original bush outer shell has been removed.
 
Top