jamesbaa
Member +
Hi guy's and girls,
I spent this morning fitting my whiteline front anti roll bar, and thought id take some pictures and do a write-up!
Tool's needed
Axel stands
Jack
12mm spanner
13mm spanner
2 x 14mm spanner
17mm socket
The first thing to do is jack up the front of the car and secure on axel stands, then remove both front wheels.
Then identify the front anti roll bar and the bottom bushes and drop links.
I then un-bolted the bottom bolt of the drop links on either side and loosen off the u-bushes.
I then un-bolted my exhaust and once that was done i unbolted my arb and slid it over the exhaust.
A picture of the standerd ARB and the whiteline item.
Now repeat the process of sliding the ARB over the exhaust, Grease up the new bushes with the grease provided and bolt it back into position ensuring it is central.
Now Grease up the new drop link bushes
and then align it all up and fit the new drop links
It's now complete, ensure everything is bolted up tight and ensure not to over tighten the drop link bolts!
I think everything is included in the write up, if anyone feels that it needs amending, please post it!
I spent this morning fitting my whiteline front anti roll bar, and thought id take some pictures and do a write-up!
Tool's needed
Axel stands
Jack
12mm spanner
13mm spanner
2 x 14mm spanner
17mm socket
The first thing to do is jack up the front of the car and secure on axel stands, then remove both front wheels.
Then identify the front anti roll bar and the bottom bushes and drop links.
I then un-bolted the bottom bolt of the drop links on either side and loosen off the u-bushes.
I then un-bolted my exhaust and once that was done i unbolted my arb and slid it over the exhaust.
A picture of the standerd ARB and the whiteline item.
Now repeat the process of sliding the ARB over the exhaust, Grease up the new bushes with the grease provided and bolt it back into position ensuring it is central.
Now Grease up the new drop link bushes
and then align it all up and fit the new drop links
It's now complete, ensure everything is bolted up tight and ensure not to over tighten the drop link bolts!
I think everything is included in the write up, if anyone feels that it needs amending, please post it!