Garrett T3 turbo on 4efte?

gra893

Fresh Recruit
Good evening guys, i have some questions...

I just bought a garrett T3 turbo...

1. Is this good for our 4e engine?
2. How much hp could i make with it on stock internals with supporting mods?
3. As i want to build a turbo manifold for t3, what type would be great? short runners, equal length or tubular type? as i dont want it to boost late...
4. What RPM do you think the boost kicks in?
5. How much boost can stock internals handle?

Heres my current setup
ct9b w/ hks actuator
greddy profec boost cont. set @ 1.1 bar
SAFC2
450cc injectors
exedy tri pack clutch..

Any help would be appreciated... thanks
happy new year to everyone
 

AdamB

Member +
It will be ok for the 4e, but depending on what you going to use the car for. The bigger versions of the T3 will probably be slightly too laggy for road use. They do range from about 250bhp to 450bhp, depending on what T3 you go for.
A short runner manifold will reduce the lag, but will change the powerband completely.
I'm assuming that the standard internals will be fine for 1.1 bar aslong as its mapped properly.

Adam
 

AdamB

Member +
That spec looks fine for what you are after, what boost pressure are you planning on running?
 

gra893

Fresh Recruit
That spec looks fine for what you are after, what boost pressure are you planning on running?

around 1 to 1.1 bar w pump gas 96 octane and maybe later on will add alcohol injection on my system.. what would be the outcome some how? thanks for your rep...
 
Top