Harry1994gt
Member
Hi, i purchased a gearbox with aftermarket lsd for my gt project im converting from auto to manual,
The new box was filthy inside amd out so i opened up the case halves and cleaned it all thoroughly inside and out and put it all back together (everything inside looked good and previous owner said the box had no issues)
Now i have the box back together i am using the selector to select each gear by hand to test it, it does ingage 1-2-3-4 but 5th (i believe its 5th if i push the selector all the way in and rotate to the right?) will not go into gear,
Any ideas? The box has no oil in it which could be the problem?
In neutral i can spin the shaft by hand and see the driveshaft outputs turning
In all other gears i cannot spin the shaft by hand at all (normal i guess) except for one gear which i think is reverse will spin the driveshaft outputs in the opposite direction to neutral when spun by hand)
I just want to be sure this box is ok before installing it on the car
Thanks for your help
The new box was filthy inside amd out so i opened up the case halves and cleaned it all thoroughly inside and out and put it all back together (everything inside looked good and previous owner said the box had no issues)
Now i have the box back together i am using the selector to select each gear by hand to test it, it does ingage 1-2-3-4 but 5th (i believe its 5th if i push the selector all the way in and rotate to the right?) will not go into gear,
Any ideas? The box has no oil in it which could be the problem?
In neutral i can spin the shaft by hand and see the driveshaft outputs turning
In all other gears i cannot spin the shaft by hand at all (normal i guess) except for one gear which i think is reverse will spin the driveshaft outputs in the opposite direction to neutral when spun by hand)
I just want to be sure this box is ok before installing it on the car
Thanks for your help
Last edited: