glanza 4e headwork question help

[ep-dylan]

is it ok if i change the caps on the cams ?
im changin my head as a small crak appeard but got a head wit no caps can i use my old ones ? ?
help please

 

[H_D]

I would not reccomend doing this unless you get an engineer to re-line bore the caps so they match the head and accept the cams with the correct tolerances.

 

[AdamB]

As above, they are line bored to the head.

 

[Skalabala]

Yes, line bore. Its usually cheap
And get the head skimmed to get it nice and clean when you take it for line boring.