glanza tb2810 1bar

[5e colin]

what labour thats do it urselve !!!! ( exept boring the engine ofcourse ) whit labour be prepared to pay the usual 1600 to 2200e depending the gear u get

 

[rod glanza]

that's a lot for now so only the parts 1200e. i dont have the experiance do do it my self

 

[5e colin]

not really some rods piston combo wil cost 1000e on ther own al depends what u go for !!!!

thats for the parts, rebore , and bearing in front of u

pic ur builder wisely coz he will be playing with a lot off money of u

prices run up when you cant do it urselve

 

[rod glanza]

i dont see how i can bill did my self. but for now i stay with this setup,maybe forge it next year.beacuse 3weeks ago installed the turbo and new clutch kit it cost 1700e for now i stay here.

 

[5e colin]

no worrys u just might save a bit more then and buy a ready build 1 theres a few companys who sel forged lumps

 

[DudFunk]

What about all the Jamaicans running stupidly high power and boost through completely standard blocks?

I can find quite a few that are well,well over 220bhp(some closer to 300+ completely stock block) and seemed to last just fine from what I can find....

Search around this site plenty of examples :rockon:

 

[5e colin]

the fact is oem ringlands start breaking at 1.2/1.3 bar i dont think u can reach the 300bhp and still have a driveble car

 

[DudFunk]

the fact is oem ringlands start breaking at 1.2/1.3 bar i dont think u can reach the 300bhp and still have a driveble car

Thats very good to know Colin thanks for the info!

 

[rod glanza]

from what country they sell a ready build

 

[5e colin]

england mate here is a link to 1

http://www.tuningdevelopments.co.uk/index.php?cPath=502_519_577&sort=5a&page=2

 

[rod glanza]

zisco told me they use airis pistons and pautre rods i think he told me good for 2bar