Greddy E-manage blue fitting. (GLANZA)

[kingyglanza]

Hi ya,
I remember seeing on the old site that somone was in the process of making an E-manage fitting guide but cannot seem to find it anymore. Anyway i have been on the Greddy website but they dont have any fitting guides etc. I also have the ignition, injector, E01 link up harnesses and support tool on the way, are these simple to fit? Is there any point in getting the knock sensor for the E-manage? Can any of you guys help me out with an ECU pinout with what goes where because i am lost? :homer:

 

[sammy]

Is the pin out not in your install manual. I got an ultimate and from reading the manual i think it tells me everything I need to know about fitting.

 

[WallaceGlanza]

You can't of looked very hard

http://www.toyotagtturbo.com/old/viewthread.php?tid=35510&page=2

 

[kingyglanza]

Thanks Wallace, great help. I got the E-manage out of my brothers car when he put it back to standard so i have no manuals.

 

[WallaceGlanza]

Thanks Wallace, great help. I got the E-manage out of my brothers car when he put it back to standard so i have no manuals.

No problem, one thing though don't take the diagram which I did as being correct, I've fitted the emanage according to that but haven't had it mapped yet so it might not be right.

You can use it to help at your own risk!!:homer:

 

[kingyglanza]

LOL ok then mate, no problems. Are you running any extra harnesses like ignition, injector. etc?