[GUIDE] Window Motor Fitting *

quadcorecraig

Member +
As most of us know the window motors are shit on the EP and stop working. This is my guide to removal & refitting the motor.

Time:
1 Hour

Tools:

Flat blade screwdriver
Star keys - size T26
Cross head screwdriver
10mm socket or 10mm spanner
grease
Fu*king kneeling pad :rolleyes:
mirrow
long nose pliers
(Blade maybe)

Side: drives


Motor thats going on

P1030798.jpg


Heres how your door should normaly look

P1030806.jpg


Start with undoing the screws on the switch and handle pannle

P1030807.jpg


P1030808.jpg


P1030809.jpg


undo the door catch screw

P1030811.jpg


the pannle should come away from the card being held on with just the wires

P1030812.jpg


use the flat blade to push up the swtch pannle

P1030813.jpg


disconnect the plug from the switch block

P1030814.jpg


the handle should now come away from the card

P1030815.jpg


Push to the left you should hear it click (drivers side)

P1030817.jpg



pull all 4 corners of the card (you should hear them pop)

P1030819.jpg


P1030818.jpg


P1030820.jpg


P1030821.jpg


Push through the door catch at a angle

P1030822.jpg


P1030823.jpg


Card removed

P1030824.jpg


should look like this

P1030825.jpg


peel down the shit sheild starting at either top corner

P1030827.jpg


P1030827.jpg


rip a bigger gap for the door catch to pass through (saves breaking the little green clip that joins it to the rods) ;)

P1030829.jpg


Slot it back in so your dont hit it with spanner or ratchet

P1030834.jpg


the 4 10mm bolts you can see here that katy cornerd and romove them ( i dint because i have done this before but use a block of wood to wedge the window up when you start to undo the 4 bolts

P1030831.jpg


P1030832.jpg


P1030833.jpg


behind there is the motor screws (stars) (shit pics)

P1030837.jpg


P1030836.jpg


Thats where they are there hard to fine but get a mirrow behind
to see where they are if you cant feel them out :p

P1030842.jpg


using your long nose pliers grip the little clip that holds in the plugs and push it through
P1030839.jpg


undo the plug
P1030840.jpg


remove the nackerd motor from the gap closes the car
P1030845.jpg




TEST IT OUT


P1030848.jpg


once you have done that its just putting back together now


REFIT


Dab some grease on your new motor gear

P1030849.jpg


Put in the same way as you took out :)
P1030845.jpg


Hold inplace so you can see the holes line up

P1030852.jpg


Put 1 bolt in the bracket to hold your motor tight while you put the others in

P1030853.jpg


Pop the rest in

P1030854.jpg


using your T25 star key screw the motor into the bracket (its a right arse to get to but just take your time and have a cupa and a fag :)

P1030844.jpg


push the plug in so they lock tight, and pop th e clip through the door

P1030855.jpg


push the door catch to the left of the car to remove it from the locks (drivers side)

P1030856.jpg


pop your card back on pulling the wires through this hole

P1030857.jpg


angle the door catch back in card so it passes through easy

P1030858.jpg


BANG ON
P1030861.jpg


P1030860.jpg


push the door catch to the left to lock inplace (drivers side)

P1030863.jpg


screw in

P1030865.jpg


pull the wires through the door handle

P1030866.jpg


line up with holes

P1030867.jpg


P1030868.jpg


plug clip back in

P1030869.jpg


put switch block back in right hand side down first you should see the catches at a angle (drivers side)

P1030870.jpg


push the front clip down making sure to line up

P1030871.jpg


DONE!!!!

P1030872.jpg




hope this helps! rep it always good ^__^
 
Top