How to get a stock head 230WHP

C Jay

Fresh Recruit
Hi guys i still running my 4EFTE engine
forged pistons wiseco and scat rods with Kings bearings
stock ct9 turbo and manifold running with 2.5 downpipe and exhaust
front mount intercooler with heat crapping already done..

still not tune this car I'm going to tune coming week i need to get a 210 - 240 WHP between power
so i will upgrade turbo and manifold to td04 , vf28 or vf 22 with screamer pipe injectors upgrade to 550CC evo 9

engine head is only done port polished not install cams

what are the mods i can do or this is ok ??
 

Timmah

Member +
If you're going to a bigger turbo, you'll probably reach your power target - I'd personally aim for a safe tune so you can thrash it without the risk of popping anything.

I'm sure people are making similar power on stock engines with a TD04, injectors and a tune.

I had a friend here in NZ that used a Holset H22, 500cc injectors with a Link ECU and a tune and made 150kw or 200 WHP, boost came on around 2900rpm and it was savage fun. Downside it as that made too much torque and he just snapped axles and wheel spun all the time.
 
  • Like
Reactions: Jay
Top