Levin AE101 2 POT Brake Conversion Ready To Go

Status
Not open for further replies.

Gee

Member +
For sale: AE101 2 POT Brake Conversion Kit Ready To Go*

Item Condition: Discs, spacers, pads and pad fitting kit are all brand new. The calipers and carriers are used.

Price and price conditions: £400 + delivery

Extra Info:

Included in the kit is the following:

AE101 2 POT calipers with carriers.
AE101 discs which have been grooved and machined to 260mm for fitment.
AE101 brake pads with fitting kit.
8mm spacers needed for fitting.
Longer studs (M12 x 1.5, 63mm length).

All of this completes everything needed in order to fit the brake setup which I have taken from the guide here.

I believe the diameter of the hub hole in the middle of the disc is 55mm (?) which is the fitment for later EP82's (?) and Glanzas. Any confirmation from someone would be appreciated.

The only thing needed is a drain plug from one of the calipers, easily obtained from Toyota.

Pictures:

The discs

th_Picture009-1.jpg
th_Picture011-1.jpg
th_Picture010-1.jpg


Enlarge - 1 2 3

The spacers

th_Picture012-1.jpg


Enlarge - 1

The calipers

th_Picture001.jpg
th_Picture002.jpg
th_Picture003.jpg
th_Picture004.jpg


Enlarge - 1 2 3 4

The pads and fitting kit

th_Picture007.jpg


Enlarge - 1

Extended studs

th_Picture008.jpg


Enlarge - 1

Misc and spare clips

th_Picture005.jpg
th_Picture006.jpg


Enlarge - 1 2

Contact Details: U2U

Location: Huddersfield

Delivery & Conditions of Delivery: Postage cost on request. Need to package and weigh.

*Only item missing from the kit is a drainage bolt from one of the calipers. This can easily be obtained from Toyota.

I have been advised that for all other additional fittings/bolts for the calipers can be used from your existing calipers.

If in doubt, please research.

This kit is complete to the best of my knowledge as taken from the guide here

I can not be held responsible for any additional componants needed.

Calipers were purchased in working order as advised by the seller. I have not tested these myself.

Any transaction is final!
 

FeNder

Member +
you're right , the later ep82s and glanzas have 55mm center holes ,
earlier ep82s have a 54mm center hole .
free bump !
 

Gee

Member +
Just and idea of what I've spent to stop the silly offers coming in:

Discs - £170
Pads - £50 ? Can't remember
Calipers - £160
Studs - £10 ? Can't remember
Machine work and spacers - £80

So about £470.
 
Status
Not open for further replies.
Top