Lower arm compatability

SKINY

Lifer
Do the Glanza Arms fit the GT and vice versa anyone ?
Local boy, Toyota parts NI has new Glanza arms complete with bushes in stock now :)
 
this is strictly hear say Skiny,,so hopefully someone can clarify either way...in the past i've been told that the ep82 arms and ep82 ball joints should be used together...same for the ep91....they will fit on either car, but supposedly, you're not to mix them up

you can try checking the part numbers to see if they are the same between the two models
 
I had a glanza V and a gt Turbo and both wishbones swapped over a 110%

I have the glanza V wishbones on my gt now as they had Poly bushed mounts on them

thanks for the feedback,,so they are interchangeable...that confirms part of what i've heard

now to look at the other part, did you use the entire glanza set up (glanza lower arms and glanza ball joints) on your GT? or are you using glanza lower arms and GT ball joints?
 
I can't say for sure will glanza ball joints fit a gt. I just gave my reg number when getting my ball joints
 

Jay

Admin
They are but if you replace them in pairs it eliminates any silliness with the geometry afterwards.

Bare in mind the rear bush might differ depending on model year, I would factor in a set of D-clamps to suit the new arms once you've measured them.

EDIT - For reference the rear bushes changed with the 1998 model.
 
Last edited:
Top