My ITB's working - 5e-fhe Sportif

dac69er

dac69er

Super Moderator
have you not connected up the tps? how does it run in general?

good work. not many people bother modding the na. is that a custom exhaust mani or a bought one?
 
EP91_Chris

EP91_Chris

Member +
dac69er said:
have you not connected up the tps? how does it run in general?

good work. not many people bother modding the na. is that a custom exhaust mani or a bought one?
Click to expand...

Cheers pal, The TPS isn't connected - it didn't make any difference when it was connected. Its the OBX Tercel Manifold.


5e colin said:
nice 1 chris it looks like it was supposed to be in there
Click to expand...

Cheers dude! Still got a few things to do before it is running perfect.

Sheldon said:
nice!
Click to expand...

Cheers!
 
dac69er

dac69er

Super Moderator
you need to use the starlet tps. that variable one on there is no good. needs to switch, that is why it made no difference. will work a lot better then :)
 
Last edited:
Jay

Jay

Admin
Sounds great!

Very tidy install, as Colin says they look like they are meant to be there. Should be interesting to drive mate.

Jay
 
EP91_Chris

EP91_Chris

Member +
dac69er said:
you need to use the starlet tps. that variable one on there is no good. needs to switch, that is why it made no difference. will work a lot better then :)
Click to expand...

I'm starting to look in to changing the TPS, basically the Starlet TPS is the same size as the Triumph one, so nothing else needs fabricated. I'm going to file down the part which goes into the TPS on the ITB's and hopefully it should be a straight forward swap :)

Jay said:
Sounds great!

Very tidy install, as Colin says they look like they are meant to be there. Should be interesting to drive mate.

Jay
Click to expand...

Cheers Jay, started stripping her down yesterday, should have it finished by the weekend, well hopefully. Can't wait to drive her with them on!
 
EP91_Chris

EP91_Chris

Member +
christyep91 said:
cool job,anybody ever tried the blacktop 20 valve throttle bodies on them,might not be the room for them
Click to expand...


I know of two SR's with 4a-ge running ITB's, as far as I'm aware no one has put them on to an e-series engine. A lot of custom fabrication went into make them. It probably easier to use bike ones as the 4a-ge one come as a complete unit iirc.
 
sx_turbo

sx_turbo

Lifer
christyep91 said:
cool job,anybody ever tried the blacktop 20 valve throttle bodies on them,might not be the room for them
Click to expand...

to much hardwork, to difficult to get hold of, and they are to large for the e series engine.

750 gsx throttle bodies are a very good size for the starlet.
 
Chris@CCM

Chris@CCM

Member +
Standalone ecu would be what u really need , itbs can be hard to get right at the best of times never mind trying to use the stock ecu
 
You must log in or register to reply here.
Top