need help after changing clutch

DWB

DWB

Member +
hi all

i changed my clutch yesturday wit my dad. got it all in an back together. tha problem is wen i took it for a test drive the car was all over the road an i had to pump the brake peddle to get it to stop.

so i took the wheel off an found that my drive shafts wernt tight as there is alot of play in them. i thot they wer tight enough tho. is there a surtain way to put them in or is it just a case of tighting the nuts on up as they r quite tight as it is?
 
A

Adam_Glanza

Member +
you probably just havent got them connected properly mate there is a bit of a knack to lock them into the box properly but its not really something you can describe you gota just do it
 
DWB

DWB

Member +
hi mate. they are in the box 100% its at the disk side im having trouble with. i havnt looked at it 2day being a sunday, so im just lookin fr thoughts as what i can do to sort it after work 2mro

cheers
 
I

ivan

Member +
is the nut coming loose? if so then the chances are it is your wheel bearings that need replacing aswell.

Otherwise tighten it a bit and put the split pin through it.

Also check to make sure your hubs are bolted to the control arms correctly, and everything else is tight.

ivan
 
You must log in or register to reply here.
Top