Need help! Any starlet geniuses???

GlanzaGeek

Member +
So I've built a 4efte td04. Got an engine and dash loom for it wired it all up to a point where it starts and I've timed up with an ignition timing light. All good. Had an issue with my headlights being on constant, traced to bad connections in indicator stalk.

Today, I had it running, ran out of fuel and now after putting 5 litres in it, it turns over but won't start
I can smell fuel, and my in tank pump is working.
But what I have found is I have 0.7v on a wire going to the module up near the bulkhead, next to diagnostic port. And if it's unplugged I get 4.7v.
Is this right??
I'm thinking possible ignition fault
 
Top