Oil Pressure & Temp gauges..help please

Frankieflowers

Member +
His oil plate is also 74mm and fits(completely stock, but maybe something happend in Japan before he owned it). Only thing that could be possible is that the oil filter relocation bracket and the power steering bracket on mine can be rotated a tiny bit which could give it enough space, but I doubt it for now.

Will be pulling the engine out so I can replace all seals soon and get the engine cleaned aswell and try then.
I doubt that you can move the relocation bracket and steering pump bracket. We recently worked around it and there is no space to move around. The only thing you can do is trim the bracket. Good thing that you change the seals and you clean the engine. We did that before installing it.
do you know how complicated it is to change the distributor gasket sealing? It’s the only leak I have. I heard that it’s normal and it leaks oil on the water temp connectors underneath.
 

SKINY

Lifer
Just use the extension hose and T adapter in previous pics Frankie ? Save all this fucking about.
Distribution device gaskets are common failures, easy to change just pull the Distribution device out and replace it, make sure you mark the position of the Distribution device so you don't fuck the timing up :)
 

Frankieflowers

Member +
Just use the extension hose and T adapter in previous pics Frankie ? Save all this fucking about.
What are you talking about? I need to use a sandwich plate because the other option doesn’t work because oil doesn’t flow and the gouges don’t give proper temperature and pressure. That is what the professionals told me. Of course I would have preferred to put an extension hose to make the job easier but it won’t work for me.
 
Top