Removal of unwanted electrics/sensors/hoses

biscuit

Member +
Does anyone have a detailed photo/write up for removing all these sensors/hoses that are left over (connected to the throttle body/inlet) when the air-con is removed?

I've seen one photo, but doesn't really make a lot of sense to me. Anyone able to confirm what can be removed. I have a few sensors/connectors etc hanging by the coil/inlet, which I assume are to raise the idle when the air-con is turned on.

Cheers
 

corofin12345

Member +
they can all go, if the idle goes up or down just adjust idle with screw on top of throttle body.. if ya want to get a picture up of ur engine bay as is ill highlight what you can remove
 

biscuit

Member +
It's just an 96 V with the aircon removed. so all the hoses/connections still remain. I'd just like to tidy it up a bit, not a fan of hanging electrics haha
 

corofin12345

Member +
found these in my files if they are any good to ya

hose.jpg

hose1.jpg

hose2.jpg



all can be removed but just remember the pipes at the trottle body will need to be blocked off after
 
Top