Send me the remaining parts please!!!

nazzurro19

Member +
ive got one of his reverse scoops and again its not brilliant , was too high and caused a lip so i sanded it down flatter , then when i fitted it it left like a 5/6 mm gap all around it which i filled with tigerseal , not jumpin on the bandwagon just my 2ps worth
 

Vincent-ep91

Member +
I commend his work for bringing well priced JDM kits to Ireland, I also doubt that any of the genuine kits are much different? I`v passed a few ep styling parts through my hands including a livesports spoiler and can say the fitment was excellent.

However my neighbour who once worked in spain making bumpers and panels out of fiberglass said the moulds can only be re-used a certain ammount before thay have to be thrown away....

i sent him a txt too btw
 
Last edited:
Hi, I haven't been online for weeks as said.

Robin, I sent you emails with my phone number for you to contact me. As you know I have sent the wiring loom from the white breaker that you have the other parts from and for what reason it hasn't delivered (this has happened to many of my overseas customers, some which arrived very late or else refunds had to be made, lately, I have refused shipping outside of UK or Ireland due to this). Few weeks ago I sent you the full wiring loom from my Black Glanza which I broke earlier this year. I had no ECU but got one from Donedeal (Irish buy/sell website). The kit was sent off with extra parts for you including Sparco Steering wheel and Blitz Boost gauge just as a mark of apology for the long wait. As you say here you have still not received it I will check it's status for you tomorrow and report back here.

edit: It was this time last year you purchased the conversion parts from me. You received everything bar the loom promptly and you have said to me you were not in need for the wiring loom until after the winter time. This is when I sent you the first one. I am not saying it is not my fault, I do apologize for waiting this long and have given you some extra free parts as an apology.

This case and another customer from Canada is waiting for parts from me. I don't know if the Canadian customer is on this forum but a refund to him has been offered but for now we will wait another bit to see if they show up. When I ship to outside Ireland or UK I have no tracking info from ParcelForce unless I spend 3 times the amount for shipping.

BrendanLez, you never called me once. I always have my phone on and answer or else return a missed call. I have never been made aware of any JAM style Spoiler fitting badly. Bring it down to me, you know where I live, I will happily take it back.

Nazzueeo19 - Have you told me about this before? How can I be aware that some parts are not fitting properly if I am not been told?

Sheldon - You requested money from me to pay your Bodyshop guy to "correct the spoiler". Rather than shipping it back to me, I agreed and paid you the sum. Just because your bodyshop did not do the job right or maybe have made it alot worse is not my fault. Again, I offered to refund you but you did not want that. Do you want me to fly over to Malta and fit it right for you???


-------------------------------------------------------------------------------------------------------------------------------------------------------

99% of my customers from TGTT and I have had ALOT of spoilers / splitters / skirts sold have always been happy with the products. Like any fibreglass product manufactured by man, some may require some rubbing down or filing in order to fit - this is called preparation and is the body shops job to do this.


Has somebody mentioned that I am a scammer? WTF? Have you thought that I would scam a customer that paid me for a full 4efte conversion but he did receive from me the Engine, Gearbox, Drive Shafts and for free at the time I give him hubs and brakes with TRD pads. Do you think I decided to scam him by keeping a wiring loom that is totally useless to me and would not be needed!!?

Robin will receive his Wiring Loom and I can see when by checking it's status tomorrow.
 
Last edited:
Due to other work commitments and the huge lack of free time I will be no longer selling Starlet parts.

Admin can close my account as soon as Robin has received his wiring loom.

I want to say a huge thanks to Admin and Staff of TGTT for allowing EP-Styling to be the first on this forum to offer replicas of the very sought after and impossible to find JDM Starlet kits.

I want to say a huge thanks to all my customers over the past 3 years which all were a pleasure to deal with.

I am NOT shutting for business due to the above complaints about fitment of parts. If I have not been informed then it is not possible to improve but 99% of my customers over the past 3 years have been more than happy with my products. There have been cases where parts arrive damaged or broken, I have always sorted these customers out promptly.

I will always stick around TGTT in the future, I don't have enough time for parts as my supplier is a fair distance away from me and it is becoming impossible to do business right - this is why I needed to make this decision.

Thanks again to TGTT customers, staff and admin. :beer:
 

mad_max926

Member +
damn shame bought my trd quickshift + jam ecu from aidan over a year ago and never had no problems with the parts or delivery or anyhting, good trader like i said its a shame
 

Sheldon

Malta Area Rep.
Sheldon - You requested money from me to pay your Bodyshop guy to "correct the spoiler". Rather than shipping it back to me, I agreed and paid you the sum. Just because your bodyshop did not do the job right or maybe have made it alot worse is not my fault. Again, I offered to refund you but you did not want that. Do you want me to fly over to Malta and fit it right for you???

you still not admitting that the spoilers was not finished good at all do you? you mentioned shipping it back after it was bonded on the boot and the worst part was noticed! never asked me to post it back before, also i would have forked out money for postage when the spoiler shouldn't have had all that in the first place!

your trying to be funny are you?? its not that i didnt fit it right, its the spoiler that you sent me. how come 2 other spoilers i seen from yours have the same bad bits!?!?

you have to see this in real life, looks much more worst

spoiler2.jpg


spoiler1.jpg


id guess that has to look the same?? once fitted would have lookd horrible, but my body shop managed to fix that with the rest of all the small bad areas.

---

the sides dont even match, but noticed this after it was installed and cant see it that much...

IMAG0145.jpg


IMAG0144.jpg


--

and this...

IMAG0143.jpg


GEDC1549.jpg


the other side is much better.. not perfect but not as bad as this!

don't have a picture from the back.. as from side to side its not strait at all! some places are thicker then other places! and the body shop couldn't do that as inside is empty and he wasn't able to sand down the thick parts or else it would be strong any more.

and why in your last PM you said "I am investigating this now with the owner of that spoiler. Thanks for pointing that out. If somebody doesn't report an issue I will never know about it, speak soon." that was 30 days ago.. what where the results of your investigation??

EDIT - found pics of another spoiler.

IMG_0039.jpg


IMG_0042.jpg


in this pic you can see the spoiler from the back and the un-evenes

BTW please excuse my English... its not my first language :)

IMG_0044.jpg
 

Vincent-ep91

Member +
stop moaning, be like any person and get a tub of filler and some sand paper and sort out those minor problems yourself.

any decent bodyshop would have done that.... In fairness, who else on this site would agree that for the price you pay, those minor issues are not worth takning about.
Have you not realised that with all fiberglass bits , you will need to do minor work.

What is the alternative? buy real parts and pay exceedingly high prices
 

Sheldon

Malta Area Rep.
stop moaning, be like any person and get a tub of filler and some sand paper and sort out those minor problems yourself.

any decent bodyshop would have done that.... In fairness, who else on this site would agree that for the price you pay, those minor issues are not worth takning about.
Have you not realised that with all fiberglass bits , you will need to do minor work.

What is the alternative? buy real parts and pay exceedingly high prices

Wtf? Why would i have to sort it when it should have arrived fine! If you really know what your saying, you would know tyat filler cant sort that att all, would fall off. I couldnt read anywhere that i would receive an item that has far from minor work to be done.. your saying this just cos you know aidan. If he pointed out the work that had to be done i wouldnt hav bought it
 

RobinL

Fresh Recruit
Sheldon & the rest, I know it sucks but can you please post it somewhere else. I'm trying to get my parts posted to me, it's not a general complaint thread.

nofi

@ Aidan: I know you're not scamming me, but I hope you understand my concern.
 
Last edited:

RobinL

Fresh Recruit
No tracking details unfortunately. I just got a PM from Aidan, he's checking if Jay has the remaining parts. He'll pay Jay to send the parts to me.

I'm still wondering where the parts went. I guess some postman is very happy with two 4efte swap-kits.
 

Texx

Super Moderator
I'm still wondering where the parts went. I guess some postman is very happy with two 4efte swap-kits.

Maybe there's a Postman Pat van running around with a twin 4E swap in it??


If it's any help, someone can send the parts to me and I'll forward them on. Cheapest service I can find though is DHL Europlus, works out around £23 inc VAT, 3-4 working day delivery with tracking.
 

Sheldon

Malta Area Rep.
did you sort this out mate??? i sent him PM's and e-mails... wont reply to me after i was promised that he would "sort it on monday" of maybe 2 months ago??
 
aidan is a top lad one of the people i became most friendly with and a genuine person.

sorry to hear your not supplying parts still aidan.good luck with future buddy.

as with fiberglass parts some need minor alterations even the top brands and a suitable bodyshop should be chosen.
 

vffglanza

Fresh Recruit
Shame Bud, I Got Parts And didn't Have A mm Of A Problem Fitting! Take It Easy Bud......................................
 

Paul_JJ

Member +
Aidan is a top bloke, had business with him. You probably have postage problems. Always use signed for postage - so you can claim if it gets lost.
 
Top