AndrewDorasamy
Member
Hi guys im back.
So after all the drama i have managed to get the car on the road and running in good shape.
The car made a decent 110kw at the wheels and a torque figure of 208nm.
Currently running at 1.2bar boost limited at 6300rpm
Now i would like to know, what is the maximum power/torque i can reach safely with the correct tune, and if possible to guide me in the right direction to reach the max power/torque.
I want advice on a good boost pressure, as well as a good air-fuel ratio, timing, potential power and torque figures as well as which rpm the limiter should be at.
Take note the motor itself is bone stock but just had a overhaul and is running great.
i have the following mods:
td04 turbo(actuator wastegate)
550cc denso subaru injectors(blues)
fmic
Stand alone ecu(Dicktator Management System)
Custom long branch and performance exhaust
Higher pressure fuel pump
Any help will be highly appreciated.
So after all the drama i have managed to get the car on the road and running in good shape.
The car made a decent 110kw at the wheels and a torque figure of 208nm.
Currently running at 1.2bar boost limited at 6300rpm
Now i would like to know, what is the maximum power/torque i can reach safely with the correct tune, and if possible to guide me in the right direction to reach the max power/torque.
I want advice on a good boost pressure, as well as a good air-fuel ratio, timing, potential power and torque figures as well as which rpm the limiter should be at.
Take note the motor itself is bone stock but just had a overhaul and is running great.
i have the following mods:
td04 turbo(actuator wastegate)
550cc denso subaru injectors(blues)
fmic
Stand alone ecu(Dicktator Management System)
Custom long branch and performance exhaust
Higher pressure fuel pump
Any help will be highly appreciated.