Tuning Developments GT....

TurboDave

TurboDave

Member +
weakboy2 said:
ran my oil cooler that way for over a year with no problems at all including normal road use and track work, even shows in the mocal pictures that you can mount it upside down.

Not sure on the evo fmic core though, they arent the best for flow.
Click to expand...

That looks like an E8 IC, they flow pretty well and are very light when compared to most aftermarket ones so I'd say its a good choice plus it will do ~400bhp.
 
N

Nick@TD.co.uk

Registered Trader <a href="http://www.TuningD
Thanks for the comments guys :)

Its been a long time, TOO LONG since this GT has been on the road, hoping to make some decent figures with the setup we're running!

Ricky... no not a TD04 buddy :D

Ed... good spot! Still cleaning the strut brace up, but need to get some miles on this thing once the weather picks up!

Wishbone, covers are here: http://www.tuningdevelopments.co.uk/proddetail.php?prod=TDResCover :)

The core is Evo8, correct! it should do the job ;)



Stri gauges, will be running in our demo cars, available @ Tuning Developments (2bar also available)

16122010646.jpg


16122010645.jpg


16122010640.jpg



More to follow once its run in chaps!

Cheers

Mike Jones
Tuning Developments Ltd
 
Last edited:
G5EGM

G5EGM

Lifer
car's lookin good Nick!! ...wots the thing in the last pic?

Also is ur rad mounted where air-con one was.....does bonnet close?

can't wait to see wot power she's putting out :D
 
N

Nick@TD.co.uk

Registered Trader <a href="http://www.TuningD
G5EGM said:
car's lookin good Nick!! ...wots the thing in the last pic?

Also is ur rad mounted where air-con one was.....does bonnet close?

can't wait to see wot power she's putting out :D
Click to expand...
The last picture is the top radiator hose, glass tube! :)

The bonnet is further forward yes, and the bonnet just closes ;)

Excited to see how we get on with bhp ourselves :D

Cheers

Mike Jones
Tuning Developments Ltd
 
N

Nick@TD.co.uk

Registered Trader <a href="http://www.TuningD
Cheers buddy!

Its purely a cosmetic thing... Trying them out on our car :)

Thanks

Mike Jones
Tuning Developments Ltd
 
M

Mikey B

Lifer
I know two people who work there and do a great job. What your implying is shit, why not enlighten us as to why you said "Nuff said" ???
 
S

steveatyork

Member +
I've owned r5 gt turbos for the past 9 years mate,I've heard and seen the problems people have had with them the last thing I bought from them was a tubular manifold and it was the worst manifold I've ever seen.the welds were crap the port hole on the flange didn't even line up with the port hole on the head

and as for power claims-lol
 
W

weakboy2

Member +
They've got a dyno there dude and Mikey who does mapping there is a top bloke, built my forged motor for my gt and mapped it, no problems whatsoever. Also mapped the microtech LT-10s on my charade GTxx.
 
N

Nick@TD.co.uk

Registered Trader <a href="http://www.TuningD
We'll try this one on ours and see how we get on :)

Was still bleeding the cooling system when I took that :p

Thanks

Mike Jones
Tuning Developments Ltd
 
F

fishman

Member +
Dude I could tell you in person but Im new on here so need some posts against my name.haha I see this car on a daily basis, and each and everytime it warms the heart dude, some sweat and tears have gone into this build!! Running it in to southport was a good drive man. Keep up the hard work!! We will ride together one day man, well sort of together as your turbo is bigger than my head!!! Put kettle on I'm heading over.haha

Pics turned out well, looks epic


Fishman
 
N

Nick@TD.co.uk

Registered Trader <a href="http://www.TuningD
***Small update***

Got some mapping done over the weekend, all seems good so far, car feels quick for the boost it is running ;)

Hopefully more to follow mid-week :)

Cheers

Mike Jones
Tuning Developments Ltd
 
You must log in or register to reply here.
Top