waste spark

H

haydn28

Member +
Waste Spark Ignition conversion

i want to run a waste spark ignition using the stock coils of the dis 4e , i already have a pair , does anyone know the pinout for these coils?
 
Last edited:
Texx

Texx

Super Moderator
discoilwiring.png
 
H

haydn28

Member +
Texx said:
discoilwiring.png
Click to expand...



many thanks to texx for providing the pinouts , i did the conversion today , i have a haltech e6x on distributer type ignition , i found out that the coil pack ignitor is constant charge , so i used a dwell time of 2ms for now , and i wired the gnd, 12v+,just as the pic says,

and ignition output from the haltech to the IGF

i had it wired to igt , but got no spark , so IGF seems to be the actual ignition input for the coilpack , :)


IM now runnning on the waste spark ignition setup , it works really well , revving to 8100rpm smoothly :)

hope this will benifit others wanting to do this same conversion:beer:
 
You must log in or register to reply here.
Top