What a weekend :D my glanza just ran an 11.02 ET @ 127 mph :D

HYBRID

Super Moderator <a href="http://www.toyotagtturbo.
Hi all :D

Well what a weekend of racing it was!!! We couldnt have hoped for a better weekend hehe!! The session started on friday afternoon at 1pm but we had a very strong head wind which really screwed us up.. (well all participating really)... same story for saturday the wind was blowing at Force 7.... so bascially we had to call it a day... then yesterday the magic happened!! Two magical runs after each other .. first we hit an 11.18 ET .. then the second run saw us inches away.. with an outstanding time of 11.02 ET :D

Alot have been asking about my engine and gbox specs... well in a nutshel.. stock c series gbox with trd helical lsd...ported and polished head.. cruise 1.2mm hg, cruise valve springs, ross forged pistons, scat rods, arp fasteners on the crank, our uprated valve seals... the rest engine wise is stock :) ... As for intake, manifolds, fuel rails, etc, all is done to our specifications ie Pekitu garage spec.. and made for us by Mr. Zisco!!!

Thank you to everybody who helped out this weekend!! it was trully a weekend to remember!!! thank you all guys!!! Especially Mr.Pekitu, my team mate, engine builder and mentor!! and to Mr.Zisco for without your performance products support, racing would have never been possible to us :D !!

now for the vids!!

<iframe width="560" height="315" src="http://www.youtube.com/embed/4I73VMrD6pc" frameborder="0" allowfullscreen></iframe>

<iframe width="560" height="315" src="http://www.youtube.com/embed/k0IgXP16GCg" frameborder="0" allowfullscreen></iframe>

Hope you like the vids :) Feel free to comment, like the vids hehe :D

Thanks
Kon :drive::rockon:
 
Last edited:

Sparky

Member +
That second launch :O it just went!! :haha:

The first video looks like it was wheel spinning the whole quarter mile :haha:

So soooooooooo close to the tens! Pretty awesome result though hope to see you in the tens soon :)

Oh and super jealous of that weather its 0 degrees here :( lol
 

HYBRID

Super Moderator <a href="http://www.toyotagtturbo.
hehe thanks guys.. well yeah shes just 0.03 away from a 10 sec pass.. but all in good time hehe.. weve still got to adjust the lauch to improve our 60ft .. as were sure we can get her to run a little bit better, not to mention she has a flat spot top end.. which we need to sort out also...

@ sheldon .. yes sir still running the Emanage Ultimate .. tuned by me (with suggestions//advice by mr pekitu of course) :)

kon
 

Sheldon

Malta Area Rep.
hehe thanks guys.. well yeah shes just 0.03 away from a 10 sec pass.. but all in good time hehe.. weve still got to adjust the lauch to improve our 60ft .. as were sure we can get her to run a little bit better, not to mention she has a flat spot top end.. which we need to sort out also...

@ sheldon .. yes sir still running the Emanage Ultimate .. tuned by me (with suggestions//advice by mr pekitu of course) :)

kon


nice!! wonder what you can do with a standalone!!
 

spuddy

Ulster Area Rep.
Excellent time fella! You'll get that elusive 10 second pass soon.

Does the Drag racing continue through the winter over there? I'm so bored having to wait to March to get another shot at it.
 

Jay

Admin
Awesome result Kon, I'm pretty sure you'll nail the 10 second pass in no time. Great 'work'!
 

weeJohn

Lifer
Great result Kon, funny how your .18 was a 1.69 60ft and the .02 time was a 1.71 60ft!

There is a 10 there buddy for sure, the car is looking very good.
 

HYBRID

Super Moderator <a href="http://www.toyotagtturbo.
well done kon,excellant result!
what turbo are you running?

thanks johnny :) well im running the same old Greddy td05h-18g :)

Excellent time fella! You'll get that elusive 10 second pass soon.

Does the Drag racing continue through the winter over there? I'm so bored having to wait to March to get another shot at it.

thanks bro, naah mate, i wish it continued all year long.. this is the last event of the season... we start again next march :( *sigh*

Awesome result Kon, I'm pretty sure you'll nail the 10 second pass in no time. Great 'work'!

hehe cheers amigo :D only that little 0.03 to go lol.. :D

times coming down is always a good sign keep up the good work! 10s wil come

thanks sean :)

awesome mate!!! very quick...

many thanks sacha :D

Excellent work Kon. Impressive as always.

thanks ezra :) means alot mate :)

pukka time!

pukka time? lol i didnt quite get that lol...

Great stuff Kon, Won't be long till those 10's come :) Keep up the good work buddy

thanks adam :) shes there but we still need to set her up a little bit more.

EPIC work, cannot wait for you to hit the 9's let alone the 10's :p

haha.. mate im happy with a 10.9 lol.. 9s are not for me :) i know our limitations lol :p :D thanks bro

awesome times my friend....4e or 5e???? hope to see you in 10's soon!!!!!

4e bro :) still with a 74mm bore buddy :) thank you very much!!

wicked results mate bet your well chuffed? cant wait to get mine built now

amen bro.. amen.. weve been trying to get her ready for this for the past 4 months.. it took us a while to discover why she was cutting out at 7k... but all's well that ends well right? :D ;) thanks for the kind words

Great result Kon, funny how your .18 was a 1.69 60ft and the .02 time was a 1.71 60ft!

There is a 10 there buddy for sure, the car is looking very good.

hehe.. yeah thing is i increased the retard on the launch for the 2nd run, to try and get a better 60ft.. but then since the escort stayed longer before launch.. chris was already in launch so she got more boost off the line.. as for the run itself, we where constantly tuning her all weekend long bro.. so even from the .18 to the .02 we adjusted a couple of details here and there.. all we have to do now is adjust one final flat spot and we should be good for that magical pass :D thanks john :)

Kon
 
Top