what exhaust will fit?

[customep-82]

hey all i'm in need of some help, are there any exhausts that will direct fit my wepr downpipe? no modding

and appart from one of sacha's lol


thanks, tom.

 

[dac69er]

any of them should fit i thought????
i had one on my starlet when i got it years ago and it was the same as the blitz decat i replaced it with!

 

[Kelly]

I have a wepr downpipe and my hks exhaust fitted fine.

 

[customep-82]

it's just the one i have (which has seen better days) has the flange welded the other way up so it won't fit. and i don't want to mess about getting it chopped off, rotated and welded back on.

just want something i can bolt straight on.

 

[dac69er]

if the flange is incorrect then nothing will ift without it being re-welded in a different position

 

[customep-82]

hopefully it's the exhaust one that's incorrect not the downpipe one then.....

 

[customep-82]

just gone out to check my downpipe, it has 2 holes at the bottom (which don't look level) and 1 at the top.

is that standard? or upside down?

 

[Aidan-G]

just gone out to check my downpipe, it has 2 holes at the bottom (which don't look level) and 1 at the top.

is that standard? or upside down?

sounds like the standard pattern

do you have sachas old ct9 decat,the ones that werent braced?

 

[WallaceGlanza]

just gone out to check my downpipe, it has 2 holes at the bottom (which don't look level) and 1 at the top.

is that standard? or upside down?

Upside down.

 

[customep-82]

sounds like the standard pattern

do you have sachas old ct9 decat,the ones that werent braced?

yeah i just checked this exhaust - http://www.monstermotorsport.com/cg....monstermotorsport.com/trolleyed/96/index.htm and it looks like that will fit

it's one of sacha's old td04's and it's braced.

the thing that confused me is sacha's new ct9 downpipes are the other way as are the zep downpipes....


oh well looks like that 5zigen exhaust will match up so i might buy that

 

[WallaceGlanza]

yeah i just checked this exhaust - http://www.monstermotorsport.com/cg....monstermotorsport.com/trolleyed/96/index.htm and it looks like that will fit

it's one of sacha's old td04's and it's braced.

the thing that confused me is sacha's new ct9 downpipes are the other way as are the zep downpipes....


oh well looks like that 5zigen exhaust will match up so i might buy that

That's got two holes at the top and one at the bottom - which is the standard pattern.

If yours is different then the only exhaust that will be a straight fit would be one of sacha's old ones unfortuantely. However it's not a big job for an exhaust place to modify it.

 

[customep-82]

That's got two holes at the top and one at the bottom - which is the standard pattern.

If yours is different then the only exhaust that will be a straight fit would be one of sacha's old ones unfortuantely. However it's not a big job for an exhaust place to modify it.

just noticed that center pipe's upside down in the pic insn't it? damn lol

have you seen any of sam's td04 downpipes? just wondering if the flange on those are the right way up...

 

[Jay]

I can remember the confusion that the Annihilator exhausts caused as the flange was rotated out of line compared to stock.

That might be playing a part if the downpipe you have has been made to suit one of those old systems?

 

[Jay]

A Speedvision TD04 downpipe will not fit a WEPR Annihilator:

 

[customep-82]

cheers for the input and pics jay.

it might be easier if i get the 5zigen exhaust, line it all up and if it sits flush with sacha's downpipe but not in line i spose i can get the downpipe flange rotated.