What is this sound,

nisala4423

Fresh Recruit
guys i own a ep82 with a 4efte engine added. engine is added few weeks ago.. and i get this weird sound when i start the car.. and it fades away after 2 minute of driving. please can some one explain to me what this sound is.. i cant seem to locate where the sound is coming from.,

i added the video to zip files please help me
 

Attachments

  • WhatsApp Video 2020-12-08 at 8.27.53 AM.zip
    4 MB · Views: 6

Jay

Admin
I have listened to that about 20 times and it's still a weird one..

Hard to tell if it's something rubbing or just a really bad miss.

Are you able to affect it when it happens by pressing the clutch/revving the engine/etc?
 

nisala4423

Fresh Recruit
I have listened to that about 20 times and it's still a weird one..

Hard to tell if it's something rubbing or just a really bad miss.

Are you able to affect it when it happens by pressing the clutch/revving the engine/etc?

the sound only coming if i start up and drive when the engine is cold. after engine heats up the sound go away, barely hear it. inside the car. but till that this sound coming
 

nisala4423

Fresh Recruit
I have listened to that about 20 times and it's still a weird one..

Hard to tell if it's something rubbing or just a really bad miss.

Are you able to affect it when it happens by pressing the clutch/revving the engine/etc?
when engine revving sound increase, could it be the turbo ?
 

Jay

Admin
Really doesn't sound like it but it's easy enough to check. With the engine off remove the intake and exhaust and check the impellor shaft for play. There should only be a minimal amount of movement. It should spin freely, if it's sticking you could have a problem.

If there's any sign of the blades hitting the housing do not drive the vehicle any further.
 

nisala4423

Fresh Recruit
Really doesn't sound like it but it's easy enough to check. With the engine off remove the intake and exhaust and check the impellor shaft for play. There should only be a minimal amount of movement. It should spin freely, if it's sticking you could have a problem.

If there's any sign of the blades hitting the housing do not drive the vehicle any further.

thank you so much <3
 
Top