wiring glanza engine loom to a corsa cabin loom help needed

[jfj]

hi there everybody wanted help with my el41 project the problem is that the ep91 does not match the el41 need to splice but the ep91 have extra plugs that i dont know what they are for & if i need them wanted a few pointers or tips how to merge them,can email you pics to see clearly how they are

 

[jfj]

hi there here are the pic sfor the glanza engine loom ,what are these plugs for especially the white plug that enters the drivers side any help greatly appreiated thnks

http://s1331.photobucket.com/user/jfj0000/media/corsa/IMG-20130602-00315_zps37baa0de.jpg.html
http://s1331.photobucket.com/user/jfj0000/media/corsa/IMG-20130602-00309_zps97f9597a.jpg.html
http://s1331.photobucket.com/user/jfj0000/media/corsa/IMG-20130602-00313_zps5afdbaad.jpg.html

 

[jfj]

any help will be useful thnks

 

[Sagittarius]

You're taking the wrong approach... just splice the glanza engine loom into the corsa engine loom and everything should be fine.

 

[jfj]

yes i m going to do that but the glanza engine loom has extra plugs entering the center of the cabin & some plugs are not the same thats why i posted pics to know what the plugs are for,the glanza engine loom has one plug white plug entering the drivers side wanted what is that for thnks

 

[weeJohn]

Green one is the rad fan switch. All you do is strip all the cables that are connected to the ecu out of the Glanza loom, thats all the cables for the engine control and instrument cluster, do the same with the Corsa loom and splice the Glanza wires into the Corsa loom to suit the Corsa.

There will be quite a few different plugs coming into the drivers cabin, you only need the engine control cables so forget the rest.