Originally posted by newguye
For anyone who is interested here are the fitting instructions. I have a set of these in my car, good stuff.
Fitting Instruction
1) Free the instrument cluster from dashboard.
2) Praise open the instrument cluster cover. (It would be clips on the rovers, press down and praise open)
3) Now you have access to the OEM dials plate, use double sided tape and stick to the back of the indiglo dials.
4) Be gentle and Slide the Indiglo Dials over *
5) Stick the Indiglo Dials down by double sided tape used at STEP3.***
6) There are wires connected to the indiglo dials face, where it exit the instrument cluster, file it down so the wires do not get squashed. (DO NOT SKIP THIS PART- as it would lead to problem if skipped)
7) Connect the dials to the transformer
8) Connect the transformer to the 12v Source. (Sidelights)
9) Secure the transformer
10) Install the instrument cluster back into the car.
Tips:
* Between the OEM dials and the needle, there is gap in between, use the space there to help the indiglo dials to clear the needle base.
** Before installing the complete instrument cluster back into the dashboard, for best results take out the lights bulbs at the back for original illuminations. As those orange lights shine onto the dials will have visual effects of colour difference. Do no take out the warning light bulb, also keep the needle illumination in if you prefer!
*** Use wafer thin type double tape for best result. If for any reason the dials have to be removed once adhered, please be careful as pulling it too hard will take off some illumination material on the dials and will void any warranty.
Warning:-
Never load the transformer with input without the dials connected otherwise it will blow the transformer.
Be gentle on the wire connection to the dials faces. Do no bend, otherwise it can damage the dials faces beyond repair.
If the dials require to be removed once it got sticken down, be really careful, otherwise it will rip the lighting material off from the dials.