Search results

I am about to swap my 4efe engine with a 1st gen (they said) 4efte. Aside from I guess, being older than the newer gens, is there any performance differences at all compared with 2nd and 3rd gen 4efte's? Any downside? Or advantages maybe? hihihi... Thanks! *Actual engine posted

ANy update on this? I want to know if the Glanza tubular manifold has an idle adjust screw on the manifold or throttle body area. How about the cold start valve that we have from GT/Gi throttle bodies? Does it also have something like that on the tubular manifold? How about the idle air...

Hi guys! Just need some inputs regarding my plan of changing my 4EFE intake manifold (that looks the same as with 4EFTE) to 4EFE tubular intake that came from a Glanza (I think). My questions are: Does the tubular intake fits directly to the head and with similar bolt pattern and that I...

Hello Guys, I just want to confirm how to wire a reed switch at the back of the guage cluster to the speed wire of the ECU. Should the reed switch connection be just ground and then to the ECU speed wire? OR Reed switch is connected to a 5v source then to the ECU speed wire? My ride is...

Hahaha! No problem. Anyway, thanks for sharing your thoughts that it could be from a Gi.

Yes, it does have the same intake mani as the GT. I have a tiny actual pic of my engine on this thread: http://www.toyotagtturbo.com/forums/showthread.php?102565-Newbie-from-Philippines I am just kind of curious what does that E 4E -P10 and that -36 and that 10 or 1 degree or something that we...

Just curious. My engine is a Japan surplus 4EFE that maybe came from a Gi variant. Thanks guys!

Hi Dac Thank you for your reply. I wanna show you an0ther sample pic here. It is a 5EFE one. Notice the silver part on the top porti0n of the pump with those two vac hose disconnected. I have seen some 4E pumps that have vacuum ports like that, and s0me does n0t, like mine...

Hi guys! I just need to know where the connection for the vacuum hose is located on this 4E power steering pump? I cant seem to locate it. Does all pumps have this vacuum port for the hose connected on the lower part of throttle intake? Thank you. Actual pics.

Ouch! Could've been the answer to this. Ahahaha! Anyways, I won't be able to personally have a look at my ECU until August this year. :( Thanks anyways... I hope someone out there would be able to confirm my question so I won't need to open my ECU. hihihi. :)

Hello guys... Been looking now in the web for any diagram for a 4EFE ECU that came from Japan. When I tried to Google it, all pinouts does not have a KNK pin in the ECU, so I thought of posting one here and that someone might be able to help me with this. My engine has a knock sensor with an...

Thanks weeJohn. I think I know now what to do. First, wire the ELS pins to their respective connections ( rad fan, headlight and tail light relays ) Then wire the small idle up solenoid to PIN14 (VISC/DISC) and +B ecu pin. These pins will be triggered once ELS pins gets a current due to use...

Up for this thread... Any of you guys who knows how to wire this VSV that switches on whenever the brake lights, headlights, or radiator fan is on? I got the secondary VSV but I am not that sure how to wire them. :) The one on the left. Thanks!

tht 4efe vac lines in you tube... I have a vid there.. It might be a help.

Hi GT people. I know guys that my case is very different to most of y'all as I came from carburated to EFI engine and all of you have Starlet GT/ Glanza V which has a stock EFI engine already. But hopefully someone could still give me some thoughts about A/C amplifiers. Do carburated...

Hahahha! Thanks man... In the future, I might take out those fender mirrors. hihihi...

Hello WeeJohn My TPS is still in its original position with paint marks on the screw heads and very intact. I stupidly adjusted the throttle stop screw. Assuming that the TPS is still factory set, do I just put a .20 millimeter feeler guage in between stop screw and the lever and adjust the...

Hello weeJohn... :) It is an EE90 Corolla sedan. 1991 model, originally with 2E engine. In its stock exterior form, it looks like this: Then changed then to a JDM set-up. Corolla CE96 wagon headlight assembly and fender mirrors and then Sprinter Cielo front and rear bumpers. :)

Thank you weeJohn for replying... I am using the loom that came with the engine. But surprisingly, it does't have that air con idle up solenoid and that secondary idle up solenoid so I don't know where to wire them. What I did was connected it to the old wiring for 2E engine idle up solenoid...

Thanks for the warm welcome guys! :) I hope will be able to share some pics of my ride.... Here it goes! :) Thanks!