Search results

Which way round do the oem stem seals go? brown/grey rubber with bronze metal in a bag with red tape. black rubber with silver metal loose in the gasket kit. I hav'nt got the old set to compare. please only state if your sure. Thanks.

Using the ecu pin out diagram for 4efte ep91 on tgtt im trying to pin point all the necessary sensors from the ecu to wire in my apexi avc-r. I need to find the following (Engine RPM) 4- NE Integrated Ignition Assembly (RPM) (Speed signal) 11- SPD Speed Signal (Throttle signal) 11 - VTA/PSW...

Has anybody got one they want to part with? Thanks, James.

As tittle im after one fishnet recaro front seat pref ep91 with or with out rail but will take ep82 if clean. Im willing to pay postage as i live on the isle of wight. What you got?

Single wire sensor from the thermostat housing? new or used, working! cheers.

As title says both radiator fans keep cutting in and out even when the engine is cold and not up to temperature. The fuse box was clicking so changed around the fuses/relays but no change! When i unplug the single sensor wire from the thermostat housing ( near the bottom rad hose) it cuts out...

As title wanted ep91 glanza fuse box cover (under bonnet) must have plastic clips in tact. Also ep91 indicator units, no lenses needed. Thanks

For Sale: Mazda rx7 top mount intercooler kit. Item Condition & Description: Very good working order, could do with a clean and polish up. Comes with mounting bracket and new silicone hoses inc clips. Great upgrade over stock, will fit standard oem hoses. Price: £60...

Glanza s style closed scoop either fiberglass/grp or plastic, Any one have one to sell or no where i can get hold of one? Cheers.

Just the units needed, no lenses. pm cheers.

Front gear box mount and engine mount needed, can be standard or TRD must have good rubber bushes no splits or tears. Also needed the 3 pin plug that connects to the throttle sensor with aprox 3 inches of wire attached. Pm cheers.

Any body using 5.1 instead of dot 4? Thoughts and feedback please. Thanks.

I know that the hks fcd is wired up like this- ....Red............Black..........Yellow..........White ...Power....Ground/earth.....ecu.....Pressure sensor So is the jam fcd wired up like this? ....Red............Black...........Green..........White...

I know that the hks fcd is wired up like this- ....Red............Black..........Yellow..........White ...Power....Ground/earth.....ecu.....Pressure sensor So is the jam fcd wired up like this? ....Red............Black...........Green..........White...

Looking for a ct9 hybrid, Tongs, Toytuning etc no speedvision no excessive shaft play must have good oil seals. What you got? Cheers.

Just getting my mates car set up before it goes to the tuners and wanted to no what to set the FCD at when running around 0.9bar boost and 2.8bar fuel? Cheers.

Just wanted to no if the 4efe and 4efte dizzy cap was the same or not? As can get a 4efe cap for half the price of an 4efte! Cheers.

Right so had taken the starlet out for run for the first time since christmas and have developed a flat spot from 2100-3200rpm then takes off like a rocket! Currently running 0.9bar boost and around 2.8bar fuel when it was set up. (vacume hose off) Over the winter i have changed all belts inc...

The hand brake levers are shot on both of my calipers so if any one has a spare pair off a glanza that are in good working order and the hand brake levers are good then pm me. Not if your hand brake used to get stuck on or not work properly, obviously. Cheers.

51mm id five ply silicone 90 Item Condition: Brand new, Cost over £15 last year. Price and price conditions: £5 Extra Info: Each leg 70mm Pictures: Contact Details: Pm Location: Isle of Wight, Posted royal mail.