0.4 boost on td04

[rossco46]

I just fitted my new td04 kit and only gettin 0.4bar boost. Is there anything I can check? Not got any boost controller connected at minute

 

[sanchez]

Have you adjusted the actuator? or is it externally gated?

 

[rossco46]

Na didn't think you could adjust it

 

[Gilly2006]

Na didn't think you could adjust it

Yeah you can adjust it on the actuator arm and screw it in, makes the spring tighter to run more pressure.

 

[GTdan]

Yeah you can adjust it on the actuator arm and screw it in, makes the spring tighter to run more pressure.

providing the arm is adjustable correct - what actuator you running? starlet or scooby one?

 

[rossco46]

Got scooby one mate on a td04. Any one know how much to wind it in?

 

[Gilly2006]

Got scooby one mate on a td04. Any one know how much to wind it in?

It's just a case of winding it in and having a look to see what the pressure is, I'd wind it in a couple of turns and see what it is.

 

[rossco46]

Is that the only thing that would cause it?

 

[CDJS GLANZA]

more then likely yea mate just adjust it see if it solves the problem

 

[CDJS GLANZA]

more then likely yea mate just adjust it see if it solves the problem

 

[dekztagtturbo]

could i do the same with the stock ct9??

 

[Sheldon]

could i do the same with the stock ct9??

if you hav an adjustable actuator yes. if you dont then get an HKS adjustable actuator and you can.

 

[Gilly2006]

could i do the same with the stock ct9??

do what with the stock ct9?

 

[GT-TD04]

do what with the stock ct9?

Adjust the boost via the stock actuator is what i think he's asking.

Not with the stock actuator,you would need a HKS actuator.