5efte flywheel

[5e colin]

hey lads where do whe buy a cheap 5efte flywheel whit 212mm clutch dont want to spend a fortune like the aasco 1 cheers colin

 

[BallıGee]

around 140 pounds new from toyota but will take few weeks to get as no stock in uk

its a 3e flywheel you will need stud patten is 5e but size is 4efte

 

[weeJohn]

I just opened up the holes on my 4efte flywheel so it fitted the 5e crank. It was done on a milling machine but could have been done with an air grinder and the right bit.

 

[5e colin]

around 140 pounds new from toyota but will take few weeks to get as no stock in uk

its a 3e flywheel you will need stud patten is 5e but size is 4efte

thats not to bad thats 170 euros thats way cheaper can u confirm that this toyo part nr is correct for the 3ete 13405-11051 / 13405‑11050 i found both nrs on the net searchinng

thanks 5e colin

 

[5e colin]

I just opened up the holes on my 4efte flywheel so it fitted the 5e crank. It was done on a milling machine but could have been done with an air grinder and the right bit.

i will keep that in mind if i cant get sorted thanks for the tip

 

[gorganl2000]

http://www.zhaust.com/forum/index.php?t=msg&goto=845060&rid=8158&srch=flywheel#msg_845060

that link shows a pic of a redrilled 4efte flywheel to fit a 5e crank
and a little discussion on it as well

 

[John@ECC]

We have the Competition Clutch lightweight steel flywheels in stock and clutch's to match. If you want more info or pricing pm ECCSales2.