aftermarket ECU

[EH@B]

hiii guyz
now i have mine's ecu
and it works fine
but i need to knw
can tune itself with other turbos and injectores??? ( T25 and T28 with 440cc injectors )
wht about a/f ratios ???

 

[EH@B]

no answer

 

[Rory]

It can acomadate to a certain level.
Im sure it would run the T25 or T28, but im not sure if it could run the bigger injectors.

My own Mines ECU runs the TD04l at 1.2bar very well.
Thats on standard injectors (295cc) but with uprated fuel pump.

As far as im lead to beleive, these ECU's are tuned to run to a target A/F ratio, but dont quote me on this.

Rory

 

[EH@B]

ok mate thnx
but its danger to run 1.2 bar at 295cc injectors or im wrong ?

 

[Toby@ToyTuning.com]

As long as the duty is under 80% then no..

T

 

[HYBRID]

well we just came across a mines ecu which was setup for 440cc injectors.. it worked well with 295, 330, 440 & 460cc injectors..

it does adjust itself within its preset parameters, but all these aftermarket prepacked ecu's mostly use a/f target so its pretty easy for them to suit to virtually anything

kon

 

[EH@B]

thnx for alll
specially HYBRID
so not to worry about any thing ^_^